Page 1 of 1
2004 Yamaha Trim Tilt Motor
Posted: January 13th, 2019, 10:34 pm
by redcodefsu
I have a Yamaha 2004 90 hp 2 Stroke 90TLRC and the trim-tilt motor died. Everything I could find online leads me to model number 6H1-43880-02-00. I removed the motor today and found out that 6H1-43880-02-00 isn't the right model number. Any ideas what model number I need to get?
I also have a freshly painted 6H1-43880-02-00 if anyone is interested.
Re: 2004 Yamaha Trim Tilt Motor
Posted: January 13th, 2019, 11:21 pm
by StMarksAngler
Saw your post on HullTruth, somebody over there should have you set up by the morning!
Re: 2004 Yamaha Trim Tilt Motor
Posted: January 14th, 2019, 7:30 am
by fishinfool
From a quick parts lookup it appears that the part number you are looking for is 6H1-43840-12-00
See the following link
https://www.crowleymarine.com/yp/TF2140 ... -2004-90hp
or
https://www.boats.net/catalog/yamaha/ou ... -tilt-assy
Re: 2004 Yamaha Trim Tilt Motor
Posted: January 14th, 2019, 8:48 am
by redcodefsu
It looks like 6H1-43840-12-00 is the assembly. I'm looking for the trim/tilt motor.
Re: 2004 Yamaha Trim Tilt Motor
Posted: January 15th, 2019, 7:11 am
by fishinfool
Oops, I misread your post. It looks like the listed assembly is a superseded part, which probably means the current parts do not fit the original assembly.
Are you dealing with a bolt hole pattern problem or shaft length or something else?
Re: 2004 Yamaha Trim Tilt Motor
Posted: January 15th, 2019, 9:40 am
by redcodefsu
The width of the new motor is smaller than the one I'm replacing. The bolt hole pattern is fine, it just isn't wide enough to cover the area.
I talked to a cousin in Miami that's going to send me a used one. The pictures look the same as the one I'm replacing.
Re: 2004 Yamaha Trim Tilt Motor
Posted: January 15th, 2019, 9:56 pm
by fishinfool
Yup, looks the same. Good luck and good tilting.