Antenna Base (Which one?)

All things having to do with boats, trailers, engines, electronics and accessories.
Image

Moderators: bman, Chalk, Tom Keels

Post Reply
User avatar
Chalk
Moderator
Posts: 11995
Joined: March 9th, 2002, 8:00 pm
Location: 30° 13' N, 85° 40' W
Contact:

Antenna Base (Which one?)

Post by Chalk »

Which Antenna mount should I get? It will be a ratcheting, but should I go with the metal or nylon ratcheting base?

Thanks.... :thumbup:
User avatar
Tom Keels
Site Admin
Posts: 4712
Joined: December 11th, 2001, 8:00 pm
Location: Tallahassee, FL
Contact:

Post by Tom Keels »

Depends on how big of an antenna you are using. For 4 foot or under, the nylon is fine.
Tom Keels
Site Founder

Image
User avatar
CSMarine
Site Sponsor
Posts: 2520
Joined: December 9th, 2002, 5:07 pm
Location: Keaton Beach

Post by CSMarine »

Got a nylon on mine. Used to think I wanted a stainless.
After abusing my $70.00 antenna a couple times by stepping on it when it was retracted, and smacking it last weekend while backing it under the shelter. I'm now glad I got the plactic one that gives. Better than the fiberglass antenna cracking. :o
Another point to concider; the antenna will screw onto the base. You'll have about 15 foot of cable to deal with hanging off the base of the antenna when you screw it on.
Semper Fi
User avatar
Tom Keels
Site Admin
Posts: 4712
Joined: December 11th, 2001, 8:00 pm
Location: Tallahassee, FL
Contact:

Post by Tom Keels »

CSMarine wrote: Another point to concider; the antenna will screw onto the base. You'll have about 15 foot of cable to deal with hanging off the base of the antenna when you screw it on.
That's why you screw on the antenna BEFORE you mount the base.
Tom Keels
Site Founder

Image
User avatar
CSMarine
Site Sponsor
Posts: 2520
Joined: December 9th, 2002, 5:07 pm
Location: Keaton Beach

Post by CSMarine »

Exactly why I reminded him about it. :thumbup:
Semper Fi
User avatar
GC
Site Sponsor
Posts: 1317
Joined: March 4th, 2004, 10:46 am
Location: Loganville, GA

GPS antenna

Post by GC »

On the same subject....I need a base for my GPS antenna. I would like a nylon, but can't find one to fit on an 1-1/4" rail.
I've checked Bass Pro, west marine, and boaters world...no luck.

Any ideas???
User avatar
tin can
Site Sponsor
Posts: 12535
Joined: May 6th, 2002, 8:00 pm
Location: Tallahassee, Florida

Post by tin can »

What kind of GPS antenna do you have? Most will fit on a standard VHF radio antenna mount.
What was I supposed to do today?
User avatar
GC
Site Sponsor
Posts: 1317
Joined: March 4th, 2004, 10:46 am
Location: Loganville, GA

Post by GC »

It's the mushroom shaped Garmin antenna. It will fit on a standard VHF mount. I just can't find a nylon mount to fit on the 1-1/4" rails on the t-top. I have a stainless mount for the CB, but wasn't looking to spend quite as much on the gps mount. May have to.......
User avatar
Tom Keels
Site Admin
Posts: 4712
Joined: December 11th, 2001, 8:00 pm
Location: Tallahassee, FL
Contact:

Post by Tom Keels »

GC, go down to Advantage Marine in Medart and tell them what you need. They can get it for you. Tell them I sent you.
Tom Keels
Site Founder

Image
Post Reply