• Advertisement
beavisrealty.com


Please Support our Sponsors

2004 Yamaha Trim Tilt Motor

All things having to do with boats, trailers, engines, electronics and accessories.
Image

Moderators: bman, Chalk, Tom Keels

Boating Forum Sponsored By

2004 Yamaha Trim Tilt Motor

Postby redcodefsu » January 13th, 2019, 10:34 pm

I have a Yamaha 2004 90 hp 2 Stroke 90TLRC and the trim-tilt motor died. Everything I could find online leads me to model number 6H1-43880-02-00. I removed the motor today and found out that 6H1-43880-02-00 isn't the right model number. Any ideas what model number I need to get?

I also have a freshly painted 6H1-43880-02-00 if anyone is interested.
Key West 1720
90 hp 2-Stroke Yamaha
User avatar
redcodefsu
 
Posts: 72
Joined: June 10th, 2013, 11:33 am
Location: Tallahassee, FL


Re: 2004 Yamaha Trim Tilt Motor

Postby StMarksAngler » January 13th, 2019, 11:21 pm

Saw your post on HullTruth, somebody over there should have you set up by the morning!
StMarksAngler
 
Posts: 45
Joined: August 16th, 2017, 8:29 pm

Re: 2004 Yamaha Trim Tilt Motor

Postby fishinfool » January 14th, 2019, 7:30 am

From a quick parts lookup it appears that the part number you are looking for is 6H1-43840-12-00
See the following link https://www.crowleymarine.com/yp/TF2140 ... -2004-90hp
or
https://www.boats.net/catalog/yamaha/ou ... -tilt-assy
User avatar
fishinfool
Site Sponsor
 
Posts: 2859
Joined: June 17th, 2009, 8:58 pm

Re: 2004 Yamaha Trim Tilt Motor

Postby redcodefsu » January 14th, 2019, 8:48 am

It looks like 6H1-43840-12-00 is the assembly. I'm looking for the trim/tilt motor.
Key West 1720
90 hp 2-Stroke Yamaha
User avatar
redcodefsu
 
Posts: 72
Joined: June 10th, 2013, 11:33 am
Location: Tallahassee, FL

Re: 2004 Yamaha Trim Tilt Motor

Postby fishinfool » January 15th, 2019, 7:11 am

Oops, I misread your post. It looks like the listed assembly is a superseded part, which probably means the current parts do not fit the original assembly.
Are you dealing with a bolt hole pattern problem or shaft length or something else?
User avatar
fishinfool
Site Sponsor
 
Posts: 2859
Joined: June 17th, 2009, 8:58 pm

Re: 2004 Yamaha Trim Tilt Motor

Postby redcodefsu » January 15th, 2019, 9:40 am

The width of the new motor is smaller than the one I'm replacing. The bolt hole pattern is fine, it just isn't wide enough to cover the area.

I talked to a cousin in Miami that's going to send me a used one. The pictures look the same as the one I'm replacing.

Image

Image

Image
Key West 1720
90 hp 2-Stroke Yamaha
User avatar
redcodefsu
 
Posts: 72
Joined: June 10th, 2013, 11:33 am
Location: Tallahassee, FL

Re: 2004 Yamaha Trim Tilt Motor

Postby fishinfool » January 15th, 2019, 9:56 pm

Yup, looks the same. Good luck and good tilting.
User avatar
fishinfool
Site Sponsor
 
Posts: 2859
Joined: June 17th, 2009, 8:58 pm


Return to Boating

Who is online

Users browsing this forum: No registered users and 3 guests

Home | Weather | Tides & Moon | Pictures | Links
Articles | Area Charts | Area Guides | Online Licenses | Discussion
Reports | Tips & Tricks | Feedback | Contact | About | Advertise

Copyright 2001 - 2012 BigBendFishing.Net