gettin skinny any suggestions?

All things having to do with boats, trailers, engines, electronics and accessories.
Image

Moderators: bman, Chalk, Tom Keels

User avatar
red_yakker
Site Sponsor
Posts: 776
Joined: May 26th, 2009, 3:19 pm

Re: gettin skinny any suggestions?

Post by red_yakker »

I like both the park and wade and the park and kayak ideas, but Iunderstand if you're not wanting to get wet or to go to the extra trouble of loading a yak into the boat. Have you considered just finding a little junker john boat, or maybe an old gheenoe? I wouldn't get rid of the Key West just yet. If you're willing to do a little searching and have some patience, you could have another boat motor and trailer for about $1,000. Maybe then you could afford 2 boats.

I agree that a Panga is the closest thing to a do-it-all boat, but it has limitations. The best do-it-all boat is actually two or three different size/style boats.

Of course, I only have one boat and a kayak, but I'm broke. If you're broke too, disregard everything I say.
The gods do not deduct from man's allotted span the hours spent in fishing. ~Babylonian Proverb
User avatar
Jobu
Site Sponsor
Posts: 62
Joined: April 22nd, 2009, 10:58 am
Location: Tallahassee/Alligator Point

Re: gettin skinny any suggestions?

Post by Jobu »

Put wheels on your Key west
sealegs.jpg
sealegs.jpg (29.52 KiB) Viewed 1455 times
Yo, Bartender.. Jobu needs a refill!!
User avatar
Spot on
Posts: 56
Joined: January 15th, 2010, 10:03 am
Location: snake nation, Ga

Re: gettin skinny any suggestions?

Post by Spot on »

blue are you trying to get skinny in creeks or just on the flats The reason i ask is i have a keywest 19'6 and it will get skinny on the flats. I have not done alot of creek fishing out of this boat yet. What motor do you have on it wondering for a different reason.
blue22
Posts: 30
Joined: April 30th, 2009, 10:54 am

Re: gettin skinny any suggestions?

Post by blue22 »

I have a yamaha 115 on mine, I like going back into the creeks during high tide I can get in some of the time but have to be really careful to be out in time. I know someone mentioned a jack plate, how much might that help with my situation?
captkeyser
Site Sponsor
Posts: 1323
Joined: February 5th, 2008, 11:36 am

Re: gettin skinny any suggestions?

Post by captkeyser »

Jackplate may or may not help. If you are dragging bottom with your hull already then a Jackplate won't do a whole lot. However, if you are not dragging hull then the Jackplate would allow you to raise your motor, then trim it up which would allow you to gain a few inches. All I generally fish is shallow water. I have a 20ft Back Country flats boat and I would be limited if I didn't have the Jackplate, for my situation it helps a ton. Put you a trolling motor on there as well. :thumbup:
User avatar
big bend gyrene
Moderator
Posts: 2459
Joined: August 8th, 2005, 9:30 am
Location: Monticello, FL

Re: gettin skinny any suggestions?

Post by big bend gyrene »

captkeyser wrote:...if you are not dragging hull then the Jackplate would allow you to raise your motor, then trim it up which would allow you to gain a few inches. All I generally fish is shallow water. I have a 20ft Back Country flats boat and I would be limited if I didn't have the Jackplate, for my situation it helps a ton... :thumbup:
What he said... :thumbup:
"The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank GOD for the United States Marine Corps." Eleanor Roosevelt, 1945
hmaadd29
Posts: 226
Joined: January 21st, 2009, 12:39 pm
Location: Ga
Contact:

Re: gettin skinny any suggestions?

Post by hmaadd29 »

Jobu wrote:Put wheels on your Key west
sealegs.jpg


I would like to test drive your skiffs next time down!!
Post Reply