Hi, I am wondering if any of you have experience of installing water separating filter between the outboard and the fuel tank? I have a 98 Mercury 9.9HP.
What products do I need and where to buy them?
Thanks
how to install a water separating filter?
Moderators: bman, Chalk, Tom Keels
how to install a water separating filter?
Born to fish, forced to work!
Re: how to install a water separating filter?
Most of the separator's that I've seen have an indicator on the top that show the flow direction in ... out. It's pretty straight forward. Just place it somewhere that is easy to get to so when It's time to change the cartridge, you don't have to stand on your head.
"Good Judgement" comes from experience, ... and a lot of that..... results from "Bad Judgement".
Re: how to install a water separating filter?
Sir reel wrote:Most of the separator's that I've seen have an indicator on the top that show the flow direction in ... out. It's pretty straight forward. Just place it somewhere that is easy to get to so when It's time to change the cartridge, you don't have to stand on your head.
Thanks!
Born to fish, forced to work!
Re: how to install a water separating filter?
If this is for your gheenoe, it would be a whole lots cheaper and easier if you just bought a 5 gallon CLEAR jug and poured your gas into the jug from the tank water is heavier than gas and will sink to the bottom of the jug, then just pour the gas back into the tank and stop before you get to the water 
water is heavier than gas and will sink to the bottom of the jug, then just pour the gas back into the tank and stop before you get to the water “Before you criticize someone, you should walk a mile in their shoes. That way when you criticize them, you are a mile away from them and you have their shoes.”
