Looking for....
Moderators: bman, Chalk, Tom Keels
- SouthernPointe
- Posts: 81
- Joined: September 18th, 2019, 2:13 pm
Looking for....
Looking for one of these. Does anyone have any ideas where to find one? It’s a cover for the trolling motor outlet.
Sent from my iPhone using Tapatalk
- onefishtwofish
- Site Sponsor
- Posts: 1268
- Joined: February 21st, 2010, 9:39 pm
- Location: Quincy
Re: Looking for....
Can't read the brand name. I had so many troubles with my plug, I went to hard wired. There are lots of those on google, but if you want just the cover you will need to google it by name.
Ducks, turkeys, flats fishing. Who has time for golf?
- FishWithChris
- Moderator
- Posts: 1401
- Joined: March 6th, 2009, 3:38 pm
- Location: Inshore
Re: Looking for....
Looks like a standard Marinco plug? Call BPS parts dept or Marinco?
But really, replace it with a Battery Tender plug and call it a day. Best on the market, hands down.
sent from the Ketchup Packet
But really, replace it with a Battery Tender plug and call it a day. Best on the market, hands down.
sent from the Ketchup Packet
- SouthernPointe
- Posts: 81
- Joined: September 18th, 2019, 2:13 pm
Re: Looking for....
I agree however I then have the issue of filling holes.FishWithChris wrote:Looks like a standard Marinco plug? Call BPS parts dept or Marinco?
But really, replace it with a Battery Tender plug and call it a day. Best on the market, hands down.
sent from the Ketchup Packet
Sent from my iPhone using Tapatalk
- FishWithChris
- Moderator
- Posts: 1401
- Joined: March 6th, 2009, 3:38 pm
- Location: Inshore
Re: Looking for....
Remove precious, lightly sand and clean, cut to fit starboard sheet and hole for BT, wire, install, BAM! Otherwise you can try and make a new cover out of starboard and routing/beveled edges to recreate?
sent from the Ketchup Packet
sent from the Ketchup Packet
- SouthernPointe
- Posts: 81
- Joined: September 18th, 2019, 2:13 pm
Re: Looking for....
Yup, I’ll probably do that! Thanks for the idea!FishWithChris wrote:Remove precious, lightly sand and clean, cut to fit starboard sheet and hole for BT, wire, install, BAM! Otherwise you can try and make a new cover out of starboard and routing/beveled edges to recreate?
sent from the Ketchup Packet
Sent from my iPhone using Tapatalk
- fishinfool
- Site Sponsor
- Posts: 3094
- Joined: June 17th, 2009, 8:58 pm
Re: Looking for....
I second the Battery Tender suggestion. Hands down the best TM outlet on the market.
I believe you can print the template from their website. You might be surprised at how close it will cover your existing holes. https://www.batterytender.com/Battery-T ... -Connector
I believe you can print the template from their website. You might be surprised at how close it will cover your existing holes. https://www.batterytender.com/Battery-T ... -Connector
-
- Site Sponsor
- Posts: 5113
- Joined: June 29th, 2003, 6:31 pm
- Location: Panhandler
Re: Looking for....
Another vote for Battery Tender. Great product.
"Sun rise and sun sets. Since the beginning, it hasn't changed yet." Little Feat