Page 2 of 2
Re: Oh how quickly an UH OH can turn into a OH S&%T...
Posted: February 12th, 2008, 6:47 pm
by fishfeeder
Ordered all items except the Armature(and parts directly related to the Armature today) Total $60. The Tech told me if the motor was strong prior to the sheer pin breaking there should be no need to replace the Armature. Parts will be here Friday I plan on fishing Saturday...
I should be able to give a detailed report on what not to do when I'm done...
Re: Oh how quickly an UH OH can turn into a OH S&%T...
Posted: February 12th, 2008, 6:52 pm
by GAJOEY
for future refrence I have bought parts from these guys .
http://www.trollingmotorparts.com/
Re: Oh how quickly an UH OH can turn into a OH S&%T...
Posted: February 13th, 2008, 9:56 am
by wevans
That's where I order mine from
Re: Oh how quickly an UH OH can turn into a OH S&%T...
Posted: February 16th, 2008, 4:35 am
by gonefishing
supposed to be dry,very dry
if you nail an oyster bar with it,line wrap,oring dry rot change every year,spring cleaning kinda
Re: Oh how quickly an UH OH can turn into a OH S&%T...
Posted: February 16th, 2008, 9:08 am
by GAJOEY
wevans wrote:
That's where I order mine from
I must be doing something right if Weavins is getting them from the same place
Re: Oh how quickly an UH OH can turn into a OH S&%T...(
Posted: February 16th, 2008, 10:32 pm
by fishfeeder
She’s Back Good as Used………….I got all my parts in yesterday and spent 2 Hrs today putting her back together. Ran her in a tub of water for 2 hrs then took the NEW cone off and she was dry.
Let me be a source for anyone that need guidance on what NOT TO DO when removing a sheer pin.
All I can say is, I know have an intement relationship with my 74lbs Thrust Minn Kota…..