Page 3 of 17
Posted: February 18th, 2005, 6:21 pm
by Sir reel
Your doing a great job Chalk!
Have a good weekend
The weather's perfect...... just right for some shoulder rehab
Posted: May 15th, 2005, 5:17 pm
by Chalk
Been doing some traveling and fishing with a man that can't sing a lick.....
But, I finally got some epoxy and fiberglass and got back on task....I spliced all the panels together...I need to build a strongback, cut out the last stringer and start assembling the hull....
There's boat parts in among the junk....
To Be Continued...
Posted: May 15th, 2005, 5:54 pm
by tin can
Chalk wrote:Been doing some traveling and fishing with a man that can't sing a lick.....
Who else have you been traveling and fishing with?
Posted: May 15th, 2005, 6:29 pm
by Chalk
tin can wrote:Who else have you been traveling and fishing with?
Nobody but you, Frank Sinatra.....
Posted: May 15th, 2005, 7:41 pm
by tin can
I'm glad you enjoyed my singing.
Posted: May 28th, 2005, 7:05 am
by Chalk
Made some more progress, strongback built, bulkheads in place, stringers in place, stitched up the bottom panel, hope to have the rest of the hull stitched up this weekend...
JEM ----->
To Be Continued...
Posted: May 28th, 2005, 10:33 pm
by bait boy
Thems some pretty saw horses you got.
By the way where you gonna sit in that boat?
Posted: May 29th, 2005, 6:57 am
by Chalk
bait boy wrote:By the way where you gonna sit in that boat?
Once the hull is fiberglassed, majority of the bulkheads will have their centers removed leaving only a 2" piece of wood, opening the deck area up....
Posted: May 29th, 2005, 7:51 am
by mjsigns
Looks like you are making progress
Posted: May 29th, 2005, 6:43 pm
by Chalk
Posted: May 29th, 2005, 8:27 pm
by bait boy
That design looks a lot like my river hawk (ghenoo copy) but with a little tlc and a stronger transom.
Posted: May 31st, 2005, 3:23 pm
by tin can
Chalk wrote:
Boat bags aren't just for holding things in, they hold things down too...
Good thing you didn't use your tackle bag. Woulda broke the boat.
Posted: June 1st, 2005, 7:34 pm
by Chalk
Last big panels have been added, next the fun begins...resin, fiberglass, filleting, sanding, sanding, sanding and some more sanding
To Be Continued...
Posted: June 28th, 2005, 7:47 pm
by Chalk
Posted: July 1st, 2005, 10:01 am
by T Smith
Chalk ,
Looking good, it's almost like a gheeno (SP), huh?
Are you gonna run a tiller motor or go all out like those guys that are putting consoles and polling platforms on them?
