Grab Rail
Posted: October 9th, 2006, 7:47 am
I need a grabrail made for my console. Any suggestions?
BigBendFishing.Net
A unique website dedicated to fishing information from Florida's Northern Big Bend. This includes the area from the Econfina River west to the Apalachicola River
https://www.bigbendfishing.net/phpBB3/
Grab Rail
Page 1 of 1
Posted: October 9th, 2006, 8:39 am
Try ole Jame Dean he should have one laying around or would know who would make you one
Posted: October 9th, 2006, 8:51 am
Thanks, but James doesn't have one and hasn't found me anyone to get one made yet. He is swamped right now, so I thought I would ask around.Sea Dawg wrote:Try ole Jame Dean he should have one laying around or would know who would make you one
Posted: October 9th, 2006, 9:00 am
Without knowing what size you want, I can give you 2 suggestions.
1: Go to a machine shop and have them make you one. Find a shop that worlks with stainless or aluminum whichever you prefer.
2: A little weird, but you may want to check with a building supplier for those stainless grabrails they put in handicap bathrooms. They come in several sizes and lengths, and one just may work for you.
Hooked
1: Go to a machine shop and have them make you one. Find a shop that worlks with stainless or aluminum whichever you prefer.
2: A little weird, but you may want to check with a building supplier for those stainless grabrails they put in handicap bathrooms. They come in several sizes and lengths, and one just may work for you.
Hooked
Posted: October 9th, 2006, 3:06 pm
Thanks hooked, I've checked with 2 machine shops. Most don't deal in polished aluminum.
This grab rail must be around 32 inches wide and then extend about 24 inches above the console and then wrap over the top of the windshield.
I guess I should have been more specific. Does anyone know a company that fabricates this kind of stuff for a reasonable fee
This grab rail must be around 32 inches wide and then extend about 24 inches above the console and then wrap over the top of the windshield.
I guess I should have been more specific. Does anyone know a company that fabricates this kind of stuff for a reasonable fee
Posted: October 9th, 2006, 3:10 pm
MD - I have a grab rail that come off of our 19 ft cape horn when we had our t-top installed. I will take some measurements and get back with ya!
Posted: October 9th, 2006, 4:48 pm
Thanksfishful_thinkin wrote:MD - I have a grab rail that come off of our 19 ft cape horn when we had our t-top installed. I will take some measurements and get back with ya!
Grab Rail
Posted: October 9th, 2006, 6:51 pm
Try GFAC.Com, located in Perry. They customize rails. Nice T-Tops also, not sure about polished though????
Good Luck!
Shady
Good Luck!
Shady
oops!
Posted: October 9th, 2006, 8:30 pm
gcfab.com. Gulf Coast Fabricators of Perry. 
Re: oops!
Posted: October 12th, 2006, 1:42 pm
Thanks Grady, I'll check that one out.Shady Grady wrote:gcfab.com. Gulf Coast Fabricators of Perry.
Posted: October 12th, 2006, 2:28 pm
Haven't been following this thread until just now. Can't believe someone already hasn't suggested Marine Liquidators in Perry. They typically have all sort's of stuff like that.
Marine Liquidators - 2.6 miles SE - 265 Ring Power Rd, Perry, 32348 - (850) 223-1859 or
(850) 223-3213
Marine Liquidators - 2.6 miles SE - 265 Ring Power Rd, Perry, 32348 - (850) 223-1859 or
(850) 223-3213