BigBendFishing.Net

nn the Tallahassee area?

WF4F

I do.

So do I

If I could be so bold as to ask a favor, do either of you have it set up where your power and transducer hook ups are easy to access?

I think my transducer went bad, but Sitex wants $35 to test it and I will have to get it shipped to clearwater. I was hoping I could bring my machine and plug it up to a functional hook up to confirm it's the transducer and not the receiver/unit.

My unit is is probably 2002 or so. Power is a 2 pin, and Transducer is approx 8 or so, but I could count to verify compatibility.

Any help would be appreciated if possible. Otherwise I will send it off.

Thanks in advance.

Tournament on 7/28 or I wouldn't even ask. Again thanks.

My boat's at Panacea Harbor Marina in dry storage. If you're down that way, feel free to stop by and plug it up.

Thank you Vitz. I may take you up on that, but will try a couple other options first.

Boats on the trailer @ Beacon hill. Going down Thurs. night for the weekend if you wanna come over.

Good folks 4 sure.

I think I've got it worked out. Just applied the usual boating tool $ in place of patience.

I own two. The second one is just sitting in my computer room. If it’s not the ducer and it’s the 106 unit maybe we can strike a deal.

Brian
Gainesville FL

New transducer solved the problem.

Big Bend Brian, I sent you a PM about your Sitex.

Thanks.

DING!! You’ve got both an e-mail and a PM.
Brian