BigBendFishing.Net

Posted: **September 15th, 2007, 8:01 pm**

SINCE MY LIKE NEW 1995 115 EVINRUDE WAS STOLEN ABOUT A WEEK AGO, I NEED TO FINE ANOTHER ONE. PREFER JOHNY-RUDE V-4 BUT WILL CONSIDER 3 CYL. ANYTHING FROM 140 DOWN TO 85 HP. MUST BE IN VERY GOOD WORKING ORDER WITH EVERYTHING WORKING RIGHT. I DOUBT THAT I WILL FIND ONE WITH ONLY 332 TOTAL HOURS ON IT BUT AT LEAST I CAN DREAM CAN'T I. IF YOU HAVE ONE OR KNOW SOMEONE THAT HAS PLEASE CONTACT ME.
FUTCHCAIRO@AOL.COM
PA FUTCH THE OLD MAN OF THE SEA

Posted: **September 15th, 2007, 8:21 pm**

Sorry to hear about your loss. Keep an eye on E-bay. Ive seen a few EV-4's in that range. I'll keep an eye out for you pa.

MJ

Posted: **September 16th, 2007, 12:54 pm**

THANKS MIKE, IF YA FIND ONE LET ME KNOW.
PA THE OLD MAN OF THE SEA

Posted: **November 7th, 2007, 4:04 pm**

I found this old Johny-Rude for sale on the other forum and didn't know if you had already found one. Here you go:

http://outdoorsbest.zeroforum.com/zerothread?id=676802

Steve Stinson

Posted: **November 7th, 2007, 9:01 pm**

HEY THANKS STEVE, I HAVE SENT E-MAIL, HOPE IT HAS GOOD COMPRESSION.
PA THE OLD MAN OF THE SEA

Posted: **November 18th, 2007, 7:39 pm**

HEY STEVE, I REALLY APPRECIATE YOU PUTTING ME ON TO THE 110 EVINRUDE. I WENT OVER YESTERDAY AND BOUGHT THE ENGINE. IT IS IN GREAT SHAPE CONSIDERING THE AGE. ALL OF THE CYLINDERS HAD COMPRESSION OF 120-125 #, HAS A NEW STARTER, FOOT OIL CLEAR, WATER PUMP SHOOTING OUT A NICE STRONG STREAM OF WATER AND IDLES DOWN REALY SMOOTH. I GOT IT FOR $500 WHICH IS A GREAT BARGAN. HE ALSO THREW IN A COUPLE OF SWIVEL SEATS AND POST TO BOOT.
THANKS AGAIN FOR PUTTING ME ON TO THIS ENGINE.
PA THE OLD MAN OF THE SEA

Posted: **November 19th, 2007, 9:15 am**

PA -

I'M GLAD IT WORKED OUT FOR YOU. I FELT BAD FOR YOU WHEN YOUR OTHER ONE GOT STOLEN, AND HAD BEEN KEEPING AN EYE OUT SINCE THEN.

NOW I GUESS YOU NEED TO GET A BIG DOG TO TIE TO YOUR BOAT EACH EVENING.

GOOD FISHIN'
-STEVE STINSON

Posted: **November 19th, 2007, 11:09 am**

HEY STEVE, I HAVE DONE A LITTLE WIRING SINCE THE LAST ENGINE WALKED OFF, HAVE MOTION SENSOR LIGHT ALL AROUND THE WORK SHOP AND A 10 SEC. DELAY WHEN THE RECORDER COME ON AND TWO BLAST OF A SHOTGUN COME ON AND IT IS REALLY LOUD. ALSO PUT BOAT IN THE WORKSHOP TO FINISH UP INSIDE, I KEEP THE WORKSHOP LOCKED ALL OF THE TIME.
THANKS AGAIN FOR THE TIP.
PA THE OLD MAN OF THE SEA

BigBendFishing.Net

NEED ANOTHER OUTBOARD

NEED ANOTHER OUTBOARD

EVINRUDE ENGINE

Almar

NEED ANOTHER ENGINE

GOT ME A ENGINE

Outboard

FOUND ANOTHER ENGINE