BigBendFishing.Net

Anyone know of a good, reasonable welding shop in the Tallahassee area that can repair some holes in the bottom of an 18-foot aluminum boat? The boat is too large to turn over, so it will need to be lifted from the trailer somehow. Mister Mullet

Get in touch with Catch 22, from what I hear and have seen there ain't much welding he can't do.

MM try Tallahassee Welding, 12220 Lake Bradford Rd. They do it all. Welding, machine and also powdercoating.

Metal Fabrication.....on Weems Rd., ask for Matt tell him Jay sent you. They do all my welding see my previous post.

http://www.bigbendfishing.net/phpBB3/vi ... =2&t=16744" onclick="window.open(this.href);return false;

Catch22 can do it

Mister Mullet wrote:reasonable welding shop

Now thats an oxymoron

Who is Catch22 and what's his e-mail?

Mister Mullet wrote:Who is Catch22 and what's his e-mail?

He is the fella who posted right above you

Waviel at Porters Marine in Woodville does lots of aluminum boat welding.

Gonna fix him up so he can go fishing again without swamping, now if I can only get my boat going I could go

CATCH 22 wrote:Gonna fix him up so he can go fishing again without swamping, now if I can only get my boat going I could go

May you be blessed with 30"+ trout (since they are supposed to be sought after) and 20# red fish for helping him out.