Page 1 of 1
Chipped Gelcoat
Posted: February 15th, 2008, 5:31 pm
by mojokoko
Hey guys, I have quite a few scratches from oysters/rocks on my boats hull. While checking under the boat this afternoon, I Noticed there was a little half inch chip in the Gelcoat that was showing the Fiberglass. Do you guys know anywhere that does good repair work for these?
Re: Chipped Gelcoat
Posted: February 15th, 2008, 6:11 pm
by mojokoko
Do they own a business or is it just one person doing the work?
Re: Chipped Gelcoat
Posted: February 15th, 2008, 6:15 pm
by Tom Keels
Get some marine tex and some wet/dry sand paper and fix it yourself. Its not hard. Plus its cheap.
Re: Chipped Gelcoat
Posted: February 15th, 2008, 6:49 pm
by mojokoko
THanks for the info guys.
Re: Chipped Gelcoat
Posted: February 15th, 2008, 7:55 pm
by Barhopr
Tom Keels wrote:Get some marine tex and some wet/dry sand paper and fix it yourself. Its not hard. Plus its cheap.
x2 plus will actually be harder than the gel coat.