BigBendFishing.Net

does any body know of a prop repair shop close to thomasvill or tallahassee. i kind of bent mine this weekend on a rock.

Advantage Marine in Medart provides a prop service.

Shields has a guy that does it. He worked on mine and did a great job.

If you dont locate someone within driving distance, call Buck at Marine Wheels in Panama City and ship it to them. (850) 763-2889 With gas prices you may well come out better paying the shipping to PC from T-ville and back. They run a clean shop and work on about anything you can imagine.

Gator props in Perry.

Gator is who AMS, Advantage and Sheilds use

I've used the folks in Panama City that Rogan mentioned. (twice ) They did a good job.

Marine Wheels in PC They fixed my stainless prop 3 times before I had to scrap it on the 4th time. It was like new every time, just got real thin after being welded a few times

i took it to sheilds and they r going to send it to tampa. they said 70 to 130 bucks depending on if it had to have a new hub

well what i thought was just a bent prop is turning out to be an insurance claim. looks like new shaft bearings seals plus re conditioning the prop. not sure what else they will find when they open the lower unit.

I hate that for you YD. Get her fixed so you can get back down there and do it all over again.

I used Gator props in Perry and used the prop for the 1st time this past weekend and I recommend them.

yellow dog wrote:does any body know of a prop repair shop close to thomasvill or tallahassee. i kind of bent mine this weekend on a rock.

Bo Bellamy in Thomasville if you can put up with his old honary azz.

usually 45.00 at Gator in Perry

Have you tried Bellamy?