Table Saw
Posted: August 17th, 2003, 9:14 am
I have an older Craftsman full size 10" Table saw I no linger have room for. This is an older (late '70's) model. The table is 40" wide and 27" deep. It has a 2hp electric motor. The center section of the table is cast iron. The outer sections of the table are stamped steel. I bought this saw new. The saw has been used very little over the past 25 years. I no longer have a place to keep the saw.
I want $150 for the saw.
E-mail me at tin-can@comcast.net or PM me if you're interested.
I want $150 for the saw.
E-mail me at tin-can@comcast.net or PM me if you're interested.
