Page 1 of 1
Fluorocarbon question
Posted: April 13th, 2009, 2:04 pm
by FlatCrazy
Have you guys ever noticed the price difference between the 250-300 yard spools of fluorocarbon line vs. the 40-50 yards spools of "fluorocarbon leader"?
For example, you can buy a 250 yard spool of the Berkley Vanish fluorocarbon line for around $12.00. You can also buy a 40 yard spool of Berkley Vanish fluorocarbon leader for around $13.00. What am I missing? Are these two different products or is this just the same line just spooled in different lengths?
I have always used the larger spools of fluorocarbon "line" for leader material. Have I have been using the wrong stuff?

Re: Fluorocarbon question
Posted: April 13th, 2009, 2:29 pm
by Joe
You may notice that one is Fluorcarbon coated mono, vs the leader being 100% Fluorocarbon.
Re: Fluorocarbon question
Posted: April 13th, 2009, 2:53 pm
by birddog
Nah, just use the larger spool of Flouro. No reason to spend the $$$$$ for the "leader material".
Re: Fluorocarbon question
Posted: April 13th, 2009, 3:31 pm
by Barhopr
With leader material you will get a smaller dia. compared to regular filler line for the same class of line. Seagar Flouro #12 leader is .009"dia., where the filler line at the same dia. is only #8lb.
EDIT: And i think the leader material is tested to be closer to the stated breaking strength where the filler spool line may fluctuate + or - either side of the stated breaking strength.
Re: Fluorocarbon question
Posted: April 13th, 2009, 5:00 pm
by Jumptrout51
Use the line. Been using it since it came out and cannot tell a difference except for the price.
Re: Fluorocarbon question
Posted: April 13th, 2009, 5:23 pm
by Chalk
I got a spool of 8 lb berkley vanish you can have - broke off to many fish with it on the last two trips...aka as the only two trips with this line. Don't like it, but I'm critical and hard on fishing line.
Looking at Seaguar Invix fluorocarbon and some line that was sent to me by the folks at
www.tuffstuffunlimited.com. I will let you know how I like it after a trip or three.
Re: Fluorocarbon question
Posted: April 13th, 2009, 6:29 pm
by Jumptrout51
Chalk wrote: 8 lb berkley
No wonder, Wonder Boy.

Re: Fluorocarbon question
Posted: April 13th, 2009, 6:33 pm
by Chalk
Jumptrout51 wrote:Chalk wrote: 8 lb berkley
No wonder, Wonder Boy.

Yes...No wonder you always finish behind me and everyone else

Re: Fluorocarbon question
Posted: April 13th, 2009, 6:40 pm
by Jumptrout51
pft!
Re: Fluorocarbon question
Posted: April 13th, 2009, 10:30 pm
by FlatCrazy
I notice that everyone picks on you JT. I'm guessing there is some story I have not read. Are they picking on you because you are the man to beat in all the tournaments?
I have always used 12 lb fluoro for leader for artificials. When I live bait fish in the summer I usually don't use a leader, just tie directly onto 6-8 lb mono line. I go light as possible. Seems to help with the larger pressured trout around Panama City.
Re: Fluorocarbon question
Posted: April 14th, 2009, 7:39 am
by MudDucker
FlatCrazy wrote:I notice that everyone picks on you JT. I'm guessing there is some story I have not read. Are they picking on you because you are the man to beat in all the tournaments?
Nothing to do with tournaments ... its more to do with his goat harem ... errr herd.
.
Re: Fluorocarbon question
Posted: April 15th, 2009, 8:25 pm
by leonreno
I think that the leader material may be forumulated to be a somewhat tuffer and harder, thus more abrasion resistant and maybe better shock resistant. That said I buy the big spools myself and have had no problems. Now, mainly I use 40 lb or lighter only for inshore fishing. I found the new Seaguar Red Label 100% fluorocarbon line for about 12 bucks a spool for close to 200 yards, the cheapest I have found. Used it once so far, no problems.
Re: Fluorocarbon question
Posted: April 15th, 2009, 8:44 pm
by Reel Cowboy
I think the leader material is a little harder and more abrasion resistant.