SOLD 80# Minn Kota Riptide bow mount hand control

Need to buy or sell something, post it here.(Only Sponsor Businesses Please)

Moderators: bman, Chalk, Tom Keels

Post Reply
User avatar
bbb
Posts: 1117
Joined: May 16th, 2007, 3:31 pm
Location: Bainbridge/Tallahassee

SOLD 80# Minn Kota Riptide bow mount hand control

Post by bbb »

I'm going to take it off the boat this weekend. I don't know exactly which model this is, but should have been bought new around 2009-2010.

I was 1/2 partner on this boat, and never liked a trolling motor on a 21' Bay boat. Last time I saw the boat was in 2009 and there was no motor on it. I bought the other 1/2 partner out, and when I picked the boat up last month, a trolling motor was on it.

Needs a new prop as I broke one of the blades when deploying the trolling motor while it was still on the trailer.

Motor shows little to no use. Skeg still has all the paint. Prop "was" in new condition.

There is some paint delamination occurring on the mount. Boat was left out under the sun and last 2 years.

$400 obo

Image

Image

Image

Picture taken same day I broke the blade. :x
Image

You can see in this picture where the paint is chipping off.
Image

Dale 544-4723

Motor is currently in Bainbridge. If you want it this weekend, come on up. Otherwise, If I get it taken off this weekend, I work in Tallahassee and can bring it to town.
Last edited by bbb on July 23rd, 2012, 11:50 am, edited 1 time in total.
User avatar
1Nitrofish
Posts: 112
Joined: February 1st, 2009, 4:14 pm

Re: 80# Minn Kota Riptide bow mount hand control

Post by 1Nitrofish »

How long da shaft?...12 or 24 volt?
User avatar
bbb
Posts: 1117
Joined: May 16th, 2007, 3:31 pm
Location: Bainbridge/Tallahassee

Re: 80# Minn Kota Riptide bow mount hand control

Post by bbb »

Definitely 24volt

I think the shaft is 52"
Post Reply