Chevy 350 Motor for sale

Post by **dbplug** » April 5th, 2004, 10:10 am

Chevy 350, 5.7 liter. 4 bolt main, intake manifold with 2 barrel carb, distributor, coil, plugs, plug wires, fuel and water pump, radiator, air cleaner, starter, harmonic balancer, fan, automatic transmission flywheel.

A nearly complete motor - no exhaust manifold, no alternator, no PS pump.

Motor comes from a 1988 C1500 4X4, Ran great. Mileage and manufacture date unknown. Head cracked, water on cylinder. No external oil or water leaks. Will be ready for pickup or delivery 4/10/2004.

Asking $250.00. May be able to deliver.

Post by **dbplug** » April 8th, 2004, 1:41 pm

Throwing in a radiator with this engine. Seems I need a hi cap radiator for the new motor. Engine still runs until it is pulled tomorrow. Its gots ta go.

Here is the NEW motor:
350 CHEVY, 375 H. P.
CAST IRON GM 350 CRANKSHAFT
ZZ4 PM CONNECTING RODS
HEAVY DUTY PISTONS
SPEED PRO MOLY RINGS
HEAVY DUTY ROLLER TIMING SET
HEAVY DUTY TRIMETAL ENGINE BEARINGS
HIGH VOLUME OIL PUMP
EDELBROCK ALUMINUM CYLINDER HEADS
NEW 2.02" INTAKE VALVES
NEW 1.60" EXHAUST VALVES
HARD SEATS AND GUIDES FOR UNLEADED FUEL
NEW HARDENED PUSHRODS, HI REV LIFTERS AND ROCKER ARMS
NEW OIL PAN, TIMING COVER, CHROME VALVE COVERS
NEW GM HARMONIC BALANCER DAMPER
NEW FLEXPLATE
BALANCED, BLUE PRINTED
Edelbrock Performer RPM INTAKE
4 Barrel Carburetor 800 CFM Edelbrock
Blue Printed HEI Distributor with 53,000 Volt Coil
CHAMPION Plugs, hd ignition Wires and Electric Choke ASSY
Thermostat Chrome Housing

Somebody told me to break the new motor in correctly I should STAND ON IT.

Post by **rocket** » April 13th, 2004, 9:34 pm

db
I replaced the motor in my '88 c1500 4x4 last year. I wanted to replace mine with something like what you did, but backed out at last minute for a replacement long block with 5 yr. 100,000 mile warranty. Sounds like you are going to have a lot more fun with your new motor!!

Post by **dbplug** » April 26th, 2004, 4:01 pm

MOMMA SAYS ITS GOT TO GO BEFORE THE KILLEARN NAZIS SHOW UP. PRICE REDUCED TO $100.00

mullet · Post by **mullet** » May 2nd, 2004, 2:22 pm

If it is a 4-bolt block and is rebuildable I will take it off you hands. Let me know. Billy

Post by **dbplug** » May 16th, 2004, 7:08 pm

mullet · Post by **mullet** » May 17th, 2004, 8:25 am

just sent you an IM/email.

mullet · Post by **mullet** » May 19th, 2004, 7:15 pm

you have mail....

mullet · Post by **mullet** » May 25th, 2004, 6:53 am

call me please
229-344-3703

Called and left message on the cell.
I have no home number for you.
Thanks.