Page 1 of 1
Chevy 350 Motor for sale
Posted: April 5th, 2004, 10:10 am
by dbplug
Chevy 350, 5.7 liter. 4 bolt main, intake manifold with 2 barrel carb, distributor, coil, plugs, plug wires, fuel and water pump, radiator, air cleaner, starter, harmonic balancer, fan, automatic transmission flywheel.
A nearly complete motor - no exhaust manifold, no alternator, no PS pump.
Motor comes from a 1988 C1500 4X4, Ran great. Mileage and manufacture date unknown. Head cracked, water on cylinder. No external oil or water leaks. Will be ready for pickup or delivery 4/10/2004.
Asking $250.00. May be able to deliver.
Posted: April 8th, 2004, 1:41 pm
by dbplug
Throwing in a radiator with this engine. Seems I need a hi cap radiator for the new motor. Engine still runs until it is pulled tomorrow. Its gots ta go.
Here is the NEW motor:
350 CHEVY, 375 H. P.
CAST IRON GM 350 CRANKSHAFT
ZZ4 PM CONNECTING RODS
HEAVY DUTY PISTONS
SPEED PRO MOLY RINGS
HEAVY DUTY ROLLER TIMING SET
HEAVY DUTY TRIMETAL ENGINE BEARINGS
HIGH VOLUME OIL PUMP
EDELBROCK ALUMINUM CYLINDER HEADS
NEW 2.02" INTAKE VALVES
NEW 1.60" EXHAUST VALVES
HARD SEATS AND GUIDES FOR UNLEADED FUEL
NEW HARDENED PUSHRODS, HI REV LIFTERS AND ROCKER ARMS
NEW OIL PAN, TIMING COVER, CHROME VALVE COVERS
NEW GM HARMONIC BALANCER DAMPER
NEW FLEXPLATE
BALANCED, BLUE PRINTED
Edelbrock Performer RPM INTAKE
4 Barrel Carburetor 800 CFM Edelbrock
Blue Printed HEI Distributor with 53,000 Volt Coil
CHAMPION Plugs, hd ignition Wires and Electric Choke ASSY
Thermostat Chrome Housing
Somebody told me to break the new motor in correctly I should STAND ON IT.
Posted: April 13th, 2004, 9:34 pm
by rocket
db
I replaced the motor in my '88 c1500 4x4 last year. I wanted to replace mine with something like what you did, but backed out at last minute for a replacement long block with 5 yr. 100,000 mile warranty. Sounds like you are going to have a lot more fun with your new motor!!
Posted: April 26th, 2004, 4:01 pm
by dbplug
MOMMA SAYS ITS GOT TO GO BEFORE THE KILLEARN NAZIS SHOW UP. PRICE REDUCED TO $100.00
Posted: May 2nd, 2004, 2:22 pm
by mullet
If it is a 4-bolt block and is rebuildable I will take it off you hands. Let me know. Billy
Posted: May 16th, 2004, 7:08 pm
by dbplug
SOLD
Posted: May 17th, 2004, 8:25 am
by mullet
just sent you an IM/email.
Posted: May 19th, 2004, 7:15 pm
by mullet
you have mail....
Posted: May 25th, 2004, 6:53 am
by mullet
call me please
229-344-3703
Called and left message on the cell.
I have no home number for you.
Thanks.