BigBendFishing.Net

Mornin folks.

Mornin...

Morning Folks

Mornin Y'all

MORNIN ALL, WENT DOWN TO ST MARKS YESTERDAY MORNIN AND FISHED AROUND THE BAR IN FRONT OF THE LIGHTHOUSE AND AROUND THE EAST RIVER USING YU-ZURI ELECTRIC CHICKEN COLORED PLUG, CAUGHT 20-25 UNDERSIZE TROUT AND 4 KEEPERS BETWEEN 17-19 INCHES, HOOKED ON NICE SIZE RED BUT SHE TORE LOOSE BEFORE I COULD NET HER, THINK SHE MIGHT HAVE BEEN OVER SIZE ANYHOW. REALLY GOT HOT ABOUT NOON, LOADED AND HEADED HOME, FOUND THAT I HAVE ANOTHER SMALL PIN SIZE HOLE IN THE BOTTOM OF THE OLD TIN CAN. THIS IS THE 3 RD SMALL HOLE I HAVE FOUND IN THE LAST 3 TRIPS . I PATCHED THE FIRST TWO WITH METAL SCREWS AND BLACK DINAMITE SEALER. I THINK I NEED TO TAKE UP THE FLOORING AND JUST COAT THE INSIDE OF THE HULL WITH BLACK DINAMITE, THAT IS A LOT OF WORK FOR THE OLD MAN BUT I THINK THAT IS WHAT IT WILL TAKE TO SOLVE MY PROBLEM.
ANYBODY GOT ANY IDEAS ON SOLVING THE PIN HOLES THAT COME FROM SALT WATER ON ALUM. HULL?
PA
SEMPER FI

Nice report PA - Anything to it takes to keep the tin can floating needs to be done. I certainly hope you didn't do down there alone, bad things can happen when your'e by your self. Sounds like you stayed near the shore to be safe. Glad to hear you made it down to the lighthouse again. Sounds like you tore them fishes up and had to tell about it.