Page 1 of 1
Prop Repair Options?
Posted: May 13th, 2014, 11:45 am
by Atticus
It's been a while but I am back at that point.
Need a new hub pressed-in on one prop. On another prop - I have some "Aucilla" that need to be ironed-out.
What are my options around Tallahassee?
Re: Prop Repair Options?
Posted: May 13th, 2014, 12:10 pm
by Salty Gator
I think most places around here use the same group. They pick up on wed and deliver the next wed. I'm pretty sure you can drop it off anywhere. I've spun 2 hubs, mikes took care of one big bend marine the other, but both were done by the same place( no idea who or where). Bottom line, take it where you normally get your boat worked on. I think to replace the hub is less than $100, but it's been a few years. Good luck
Re: Prop Repair Options?
Posted: May 13th, 2014, 2:50 pm
by DEMON
SG is correct. Most marine dealers around here send the props off on a week turnaround deal. I use Parkway Marine for this. The work has always been good. Prop comes back looking brand new. Also, last I heard, Gator Props in Perry was still in business if you want to drive down there.
Re: Prop Repair Options?
Posted: May 14th, 2014, 5:49 am
by tin can
Luke, take them to Quinn.
Re: Prop Repair Options?
Posted: May 14th, 2014, 10:42 am
by zload
I believe this is the prop shop used by most local dealers and can vouch for their repairs, mine came back better than it was before the rock strike. Just get it to your shop before the pickup date! I think I saw a show on cable one time where they showed how they repaired props for rec boats on up to the big guys... pretty impressive.
http://acbprop.com/