BigBendFishing.Net

I recently had an issue with my Minn Kota 24V trolling motor, the seals in the front failed and allowed salt water to seap into the motor, this also caused the control board to short out and I was in a panic because I figured I would have to replace it, and that would not be cheap. I started researching how to repair it myself and then I came across TM services on this sight and gave him a call. I gave him the model number and told him what happened and he ordered all the parts I needed to rebuild it and got them here very quickly. I reassembled it tonight and it worked like a charm, he got me going for less than $200. I highly recommend Bill Neal and TM Service Center to any of you guys that are having any issues with your trolling motors or are looking to buy a new or used trolling motor.

Hollywood wrote:I recently had an issue with my Minn Kota 24V trolling motor, the seals in the front failed and allowed salt water to seap into the motor, this also caused the control board to short out and I was in a panic because I figured I would have to replace it, and that would not be cheap. I started researching how to repair it myself and then I came across TM services on this sight and gave him a call. I gave him the model number and told him what happened and he ordered all the parts I needed to rebuild it and got them here very quickly. I reassembled it tonight and it worked like a charm, he got me going for less than $200. I highly recommend Bill Neal and TM Service Center to any of you guys that are having any issues with your trolling motors or are looking to buy a new or used trolling motor.

I agree!

I've only had 1 problem with my Minn Kota & TM fixed it quickly & under warranty for no charge.