24' Aquasport 76- side console, 91- 250 Yamaha.

Need to buy or sell something, post it here.(Only Sponsor Businesses Please)

Moderators: bman, Chalk, Tom Keels

Post Reply
videodog
Posts: 19
Joined: June 15th, 2004, 7:20 am
Location: Tucker, GA

24' Aquasport 76- side console, 91- 250 Yamaha.

Post by videodog »

Has a small Cuddy Cabin, really only big enough for a portapotty and gear. Email me for pictures. numerous rocketlaunchers, Furuno 667, VHF radio. Insta-trim . Painted steel (not rusted Yet) trailer. Will be in Apalachicola the week of Je 21st fishing if you want to See. $6,500. Greg 770-621-0002
videodog
Posts: 19
Joined: June 15th, 2004, 7:20 am
Location: Tucker, GA

1976 Aquasport 24' hull- 1991-250HP Yamaha 2 cyl.

Post by videodog »

The 91' 250 Yamaha has About 100 psi between all 6 cylinders varys no more than 7 psi 1 thru 6. Bottom end is good, yet has some corrosion. Fiberglsass has been replaced in many places on the hull. Transom was redone from a double to a single. Only indication for me was the lines from the gas tanks. Hey! What are these lines for? Repainted hull. Needs to be back in the gulf where she belongs. Still tough and tight.
videodog
Posts: 19
Joined: June 15th, 2004, 7:20 am
Location: Tucker, GA

cheaper to keep her

Post by videodog »

Well, My new old boat has a Bottem end problem with it's Drive due to some IDIOT that put the Mercury Thrust washer on her prop. Now I need a new Bottom End or Foot. By the way, Bobby Miller is the best Yamaha Mechanic to be found anywhere! He is the Best as I'm you pro's know. My boat is in Scipio Marinia in Apalchicola. the price is now 4,500 with a rebuilt bottom end. Call with Quesions 404-966-8848. Greg
User avatar
seatrout99
Site Sponsor
Posts: 1069
Joined: January 16th, 2002, 8:00 pm
Location: Climax, GA
Contact:

Post by seatrout99 »

How about posting up a picture or two............................ Thanks.
videodog
Posts: 19
Joined: June 15th, 2004, 7:20 am
Location: Tucker, GA

Pictures 24' Aquasport

Post by videodog »

I'll try this and see if they will post. They don't include the $500 1 1/2" leaning rail/ rod holders I installed across the rear of the boat. Also, the Price is WITHOUT a rebuilt lower unit, not with. I'm looking for one now. They seem hard to find. Greg 770-621-0002

Well for some reason they won't load into this post. I know I can send them if you email me at video24@aol.com. Thanks again. Greg[/code]
User avatar
wevans
Site Sponsor
Posts: 12827
Joined: June 12th, 2002, 11:06 am
Location: Sopchoppy

Post by wevans »

“Before you criticize someone, you should walk a mile in their shoes. That way when you criticize them, you are a mile away from them and you have their shoes.”
Image
Post Reply