Page 1 of 1
Appliance Guy 51
Posted: March 19th, 2017, 9:02 pm
by Fish Masterson
Had a clogged line on my portable kenmore dishwasher. Unplugged unit, drained water and gently layed it on its side to access and unclog drain line. Stood it back up and plugged it in. Nothing. Not a noise, or light, just dead. Verified power at outlet and didn't see any obvious wires tampered with under the unit. Any idea as to what could have happened?
Re: Appliance Guy 51
Posted: March 20th, 2017, 8:22 am
by dropaline
check lid switch or door switch
Re: Appliance Guy 51
Posted: March 20th, 2017, 8:28 am
by Jumptrout51
Post the model number.
Re: Appliance Guy 51
Posted: March 20th, 2017, 9:38 am
by Fish Masterson
Model # 587.17252200 .
Re: Appliance Guy 51
Posted: March 20th, 2017, 1:05 pm
by rocket
Operator error, I'm certain.
Re: Appliance Guy 51
Posted: March 20th, 2017, 4:55 pm
by Fish Masterson
Apparently. After four days of fiddling with it, and trying everything short of whacking it with a two by four, it decided to start working again for no apparent reason. Go figure...
Re: Appliance Guy 51
Posted: March 20th, 2017, 6:11 pm
by Jumptrout51
After researching your issue, I belive your door switch is the intermittent problem.
Re: Appliance Guy 51
Posted: March 20th, 2017, 8:55 pm
by Fish Masterson
Thanks JT. I suppose I will change it when it acts up again. Thanks again.