BigBendFishing.Net

Anyone have any experience with them?

We have a guest house that is attached to our primary house by a 15' breezeway. We don't have much technology there because it is really only used by grandparents and other out of town guests. About to undergo some remodels in our house and moving into the guest house for a couple months. My son and wife demand internet TV and I'm trying to avoid another monthly service. Both houses are made of block if that makes a difference.

Would love to hear thoughts. Thanks in advance.

Honestly you may be better run lan/cat6 cable from the house the second location, even if temporary. How far is the router from the spot ?

Are you on cable, dsl, or fiber up there ?

Sent from my Pixel 6 Pro using Tapatalk

Help Chris. Above my pay grade. Router is probably 50-75’ away. Router is part of the area they are destroying though, so running a physical cable would be tough.

I know with Comcast they can come out test and add a booster for you.


Sent from my iPhone using Tapatalk

You should move the router to the guest house while the remodeling is being done. It should be able to connect to the current cable or phone line (depending on cable or DSL) if you have either in the guest house.

Wifi "boosters" are snake oil. Because of the single duplex nature of wireless, that repeater can actually cause collision issues, retransmits, and TCP reconstruction issues. They are crap, full stop. I would strongly recommend against running copper out there as you expose your house's ground to lightning, and copper ethernet only goes about 300 feet.

Your best bet is going to be meshed access points. Ubiquity makes enterprise grade home equipment for this very thing. It takes some configuration/knowledge to accomplish this, but done right you will have solid connectivity in both locations.

something like this would do the trick. https://www.flyteccomputers.com/product ... int-2-Pack

To configure Ubi stuff, there is a utility to download from them. I would set them up to not offer DHCP(let your home router do it), and to do a mesh between the two. Depending on your skill level it may take some googling, but it's pretty user friendly.

source: I manage a wireless network with about 300 access points

DKwakulla wrote: ↑March 27th, 2022, 10:32 amUbiquity makes enterprise grade home equipment for this very thing.

Ubiquiti does make a good, low cost solution. I manage 5 offices with Ubiquiti devices. I also agree with your opinion on wifi bosters!

Thanks DK. Is the solution you reference similar to a Google Nest? I have a colleague using a Nest with good success. Is one easier to configure than the other? I have limited knowledge, but I could probably bribe one of my IT guys to come help me set up. Thanks again

Thanks Gents. Have the Ubiquity mesh points on order.

Chris-may need help with install….I’ll try