Page 1 of 1

Battery Charger fixed muh Power problems on the boat.

Posted: November 29th, 2004, 10:27 am
by mojokoko
Well since I am a new boat owner I will make mistakes time to time.
It turns out my cranking battery was almost gone so I bought a Guest ChargePro 2612a and was able to get both batteries up and going.
I do have a question about keeping gps/fishfinder power connectors from going bad. Is there a good was to keep them from corroding like putting eletrical tape around the connectors to keep from getting saltwater in there.

Posted: November 29th, 2004, 10:29 am
by dstockwell
Heatshrink.

Posted: November 29th, 2004, 11:41 am
by Tom Keels
Coat them with liquid electrical tape let it dry then heat shrink the connections.

Posted: November 29th, 2004, 3:10 pm
by rocket
"Connections", as you stated, can be sprayed with white lithium grease to keep them from corroding.