Page 1 of 1
How do you add Guages and a button to Tilt your motor on?
Posted: December 1st, 2004, 11:29 am
by mojokoko
I was wondering if anyone knew how hard it is to put a button on my
console to allow me to tilt my motor from there instead of pushing the button on the motor. (4 stroke 25hp Honda). I also wanted to add some
other guages like "MPH and or battery power etc etc".
Posted: December 1st, 2004, 12:08 pm
by wevans
The trim switch is relativly simple
You need a switch "Mom/Off/Mom", preferably a heavy duty one and wires spliced into the wires at the motor trim switch
sounds easy don't it
Posted: December 1st, 2004, 12:17 pm
by mojokoko
Damn if I knew it was that easy I would do it in my sleep. Man and I thought boating was hard...
Posted: December 1st, 2004, 1:39 pm
by mjsigns
The fun part is running the wire(s) to the console and installing the switch.
Posted: December 1st, 2004, 3:30 pm
by Chalk
Just get one of these....two cranks and she's trimmed out
...
Posted: December 1st, 2004, 5:21 pm
by tin can
Gotta have me one of them high class doel fin's, too.
Mojo, where are you located? I might know someone that could help with the gauges.
Posted: December 2nd, 2004, 8:30 am
by mojokoko
Tallahassee..
Posted: December 2nd, 2004, 8:33 am
by dstockwell
tin can wrote:I might know someone that could help with the gauges.
Yea TC himself.
Posted: December 7th, 2004, 5:41 pm
by chugbug
You can get the switch at NAPA for about $5. I just put one in my boat. The switch in the handle went bad so I just mounted it in the dash.
Posted: December 7th, 2004, 5:59 pm
by wevans
This is a GREAT place to buy switches and just about anything else electrical
but to make it worthwhile ya need to order several things "shipping and such"
https://www.delcity.net/tstore/servlet/ ... frame=Home