Page 1 of 1
I'm going to sell my bay boat this spring
Posted: December 28th, 2004, 9:51 am
by Frank Bradfield
Just in case anyone is interested i'll throw it out here 1st. Since i've been grouper fishing my trout fishing has slowed so therefore i'm going to downsize my bay boat. I figured i'd wait till spring before i did anything but just in case anyone here was interested i thought i'd see. I would also consider trading for a smaller boat if the money was right. I have a lot of bay boat so here goes a quick description:
Sundance ( boat & motor, 2000 model )
Only 2 like it made ( can explain )
rated for 16 people ( will not sink )
22ft CC
compass
depth finder
radio
115 Johnson Ocean Pro
2 props
tralior
bimini top
i'd say more room than any other bay boat
price range $10,500.00
call me if you are interested
frank, 706-681-1613
Posted: December 28th, 2004, 9:58 am
by Sir reel
Good morning Frank.
A picutre might help peak some interest
At first glance sounds like a reasonable price.
Posted: December 28th, 2004, 2:52 pm
by Frank Bradfield
I knew that was coming.. ha, i have to dig some up , let me see what i can do, but until then just use a mental picture, but really its nice and i guess the main reason it hasn't been a big deal is i don't have to sell it. I have another boat 225 Key West and sometimes i look at myself and say you need to sell a boat. So let me work on it for ya... frank
Posted: December 28th, 2004, 3:03 pm
by wevans
Posted: December 28th, 2004, 3:54 pm
by Frank Bradfield
Well thats much more of the size i was thinking for me anyway.. i'm interested, call me..
Posted: December 28th, 2004, 8:46 pm
by wevans
Posted: December 28th, 2004, 9:36 pm
by RodBow
Frank, Is your boat the B22CC = Center Console without Front Seat
or the
B22CX = Center Console with Front Seat and Seat Cushion?
Posted: December 28th, 2004, 10:03 pm
by Frank Bradfield
It has the front seat in front of the center console. The difference in this boat and other B22s is Sundance made 2 proto types, one who is owned by a guide on the east coast and this one who was bought by a boat dealer who is a friend of mine, which is how i got the boat. The difference is this boat is one entire poured mould , all the decks front and back not add on pieces. They couldn't produce this boat and keep the price competitive because they had too much invested. They resumed with add on decks. I should have some pictures at worst case by monday.
My boat is in the econfina area so test driving shouldn't be a problem..
frank
Posted: December 29th, 2004, 9:14 am
by wevans
Frank, you have a PM
Links to pictures of Frank's boat
Posted: December 29th, 2004, 9:42 pm
by PinFishKing
Posted: December 29th, 2004, 10:20 pm
by wevans
