WANTED, Manual Jackplate

Post by **wevans** » January 18th, 2005, 10:17 am

For 115 Evinrude

Post by **Chalk** » January 19th, 2005, 8:55 am

Check with Bobs Machine shop or Ebay...I'm trying for one on Ebay, but not that big....

Post by **wevans** » January 19th, 2005, 9:05 am

I can't afford a new one right now

If I could, these folks seem to have about the best price that I can find

Post by **Sea Fox** » January 19th, 2005, 9:58 am

I have some heavy alum. angle that would make one.

Post by **wevans** » January 19th, 2005, 10:10 am

How much ya want for it

We have the cutters and drill press to do the work, just not the material

Post by **Sea Fox** » January 19th, 2005, 10:42 am

I have one 26" stick and a 56" peace of 1/4 X 3" angle. Make a fare offer and I will bring it Carrabelle this weekend.

Post by **wevans** » January 19th, 2005, 11:40 am

Just looked at the specs on the one they sale and it is 3/8

not sure that 1/4 would hold that heavy mofo as well as the torque of the engine

I'd hate to have the motor fall off in the middle of the ocean

Post by **Sir reel** » January 19th, 2005, 1:51 pm

But just think about what a great post you'd have!

Post by **rocket** » January 20th, 2005, 11:05 pm

That would suck!