Chalk's New Project
Posted: February 24th, 2005, 11:00 am
BigBendFishing.Net
A unique website dedicated to fishing information from Florida's Northern Big Bend. This includes the area from the Econfina River west to the Apalachicola River
https://www.bigbendfishing.net/phpBB3/
Chalk's New Project
Page 1 of 2
Posted: February 24th, 2005, 11:09 am
A little wax and she will be good as new.....I don't think it will be ready for Keaton 
http://www.stiffypushpoles.com/recyc_3.htm
Posted: February 24th, 2005, 11:11 am
Done got a hole in it, that's perfect for Keaton aint it 
Posted: February 24th, 2005, 11:13 am
The hole is on the inside. No holes in the hull.
Posted: February 24th, 2005, 11:14 am
Give him time TC, give him time
Posted: February 24th, 2005, 11:15 am
How much deadrise?
Posted: February 24th, 2005, 11:16 am
Progressive deadrise, with a pad.
Posted: February 24th, 2005, 11:18 am
Give me a visual....tin can wrote:Progressive deadrise, with a pad.
Posted: February 24th, 2005, 11:39 am
The beam is 84" at the widest point.
Deadrise, from the center out:
concave pad 10" wide +/-
2" wide flat step
10" wide +/- rise approx. 16 degrees
2" flat step
10" wide +/- rise approx. 16 degrees
2" flat step
12" wide +/- rise approx. 6 degrees
Chine
Posted: February 24th, 2005, 11:46 am
It's scary when he can't go outside and take a picture
16 degrees
16 degrees
Posted: February 24th, 2005, 11:49 am
I attempted that. I can't get far enough behind the goat to get the bottom, it's too close to the ground, it's sitting on a trailer with 2 flat 6" wide bunks on each side.
Posted: February 24th, 2005, 12:00 pm
Posted: February 24th, 2005, 12:10 pm
What may be confusing Chalk.... is the fact that the trailer still has it's fenders on. 
They ain't been knocked off yet
They ain't been knocked off yet Posted: February 24th, 2005, 1:37 pm
As Wevans said......Give him time.
Posted: February 24th, 2005, 11:23 pm
This is what's on the back of Chalk's project......
And he ain't gettin it.
And he ain't gettin it.