Page 1 of 1
JUST TESTING
Posted: February 28th, 2005, 11:32 am
by coolrowcamping
<img src="
http://www.forumpictureprocessor.com/pi ... 006_14.jpg">
THIS IS THE FIRST TIME I HAVE EVER TRIED TO POST ANY PICTURES!
HOPE THIS WORKS IF NO SORRY I WILL TRY AGAIN
SORRY
Posted: February 28th, 2005, 11:33 am
by coolrowcamping
I SCREWED UP!
WHAT DID I DO WRONG?
Posted: February 28th, 2005, 11:35 am
by dstockwell
[.img]
http://www.forumpictureprocessor.com/pi ... 006_14.jpg[./img]
Remove the periods I place in front of img /img
Re: JUST TESTING
Posted: February 28th, 2005, 11:38 am
by wevans
Take out the <img src=" and replace with [img],%20then%20take%20the%20">%20off%20the%20other%20end%20and%20put[/img] in it's place
Posted: February 28th, 2005, 11:43 am
by Aucilla
I sent you a message
on how, and I did it before wevans much more clearly 'splained it.
Posted: February 28th, 2005, 11:48 am
by Sir reel
Good morning coolrow...
If you haven't figured it out from DS's picture maybe this will help.
I think you may have missed a piece when you copied the code from the picture processor. The address for your picture is....
http://www.forumpictureprocessor.com/pi ... 006_14.jpg
If you highlight the link and then click on the "Img" radio button the link will be preceded by the following code [img]and%20the%20end%20of%20the%20link/code%20will%20be%20followed%20by[/img]. The first command says "here comes a image and the second one says "that's all the address for the image" Understand this ain't technical language...just my walk'n round explanation
The code from the picture process should need nothing else when you insert it into your post....PROVIDED you selected the Big Bend Fishing Net from the drop down list of sites. A straight copy and paste should work. Hope this helps... if not....ask again, somebody will be able to clear it up for you.