Shimano Core is out.

This area is for general discussions about fishing, rigging, baits, etc.
Image

Moderators: bman, Chalk, Tom Keels

Post Reply
User avatar
jsuber
Site Sponsor
Posts: 3350
Joined: January 12th, 2006, 3:57 pm

Shimano Core is out.

Post by jsuber »

Image
Shimano Core 100MG Casting Reel - $349.99

- Ultra-Lightweight Magnesium Frame and Sideplate
- Ultra-Lightweight A7075 Aluminum Spool Construction
- Magnumlite Spool Design This spool provides extremely low startup inertia for increased line control and casting performance even when using lightweight baits or lures. This is accomplished through using lightweight aluminum alloys and a unique design that moves the mass of the spool outward.
- S A-RB (Anti-Rust Bearings) are specially treated stainless steel ball bearings that are at least 10 times more corrosion resistant than standard stainless steel ball bearings.
- A-RB Roller Bearing
- High Efficiency Gearing (HEG) is not only the oversized gears, but also includes the setplate and sideplate, which allow for a high speed retrieve while providing unbelievable fish-moving torque.
- Super Stopper is a one-way roller bearing that eliminates backplay for solid hooksets.
- Super Free (SF) bearing supported pinion gear system eliminates friction between the pinion gear and spool shaft for increased freespool.
- Variable Brake System (VBS) uses centrifugal force rather than magnets to aid in controlling the cast for increased distance and adjustability.
- Reduced Mass VBS hub reduces the weight of the spool increasing freespool and reducing start up inertia.
- Escape Hatch Easy to use trigger allows quick access to the VBS weights and keeps the sideplate smooth for comfort when palming the reel.
- Dartainium Drag material provides a wide range of drag settings and the smoothest Shimano drag performance ever.
- Cold Forged Handle Shank is much stronger than a pressed or cast handle for non-flexing durability.
- Clicking Cast Control Adjustment allows for more confident adjustability of the friction-based cast control.
- Septon® Handle Grips This handle grip material is soft to the touch and does not get slippery when wet.
- Recessed Reel Foot allows the reel to sit closer to the rod for comfort and maneuverability.
- Instagage II (CORE100MG Only)Click here for more info.
- PV Power Grips (CORE100MGFV Only) These oversized paddle grips provide extra power and remain comfortable after a full day of deep cranking.
- Cold Forged Aluminum Drag Star
- Aluminum Cast Control Knob
- Rubber Shielded Cast Control Knob
- Tapered Ti Levelwind Insert
- Drilled Handle Shank reduces the weight of the reel without sacrificing strength.
- High Speed 6.2:1 Gear Ratio (CORE100MG Only)
- Lightweight Aluminum Drive Gear (CORE100MG Only)
- Paddle Grips (CORE100MG Only)
- Super High Speed 7.0:1 Gear Ratio (CORE100MGFV Only)
- Heavy Duty Brass Drive Gear (CORE100MGFV Only)



http://www.tacklewarehouse.com/descpage ... SCOCR.html#
Image
User avatar
Cranfield
Site Sponsor
Posts: 1922
Joined: December 12th, 2001, 8:00 pm
Location: Romney Marsh

Post by Cranfield »

Thats a nice looking reel, it would be irresponsible not to buy two. :thumbup:
User avatar
sundown
Site Sponsor
Posts: 757
Joined: October 31st, 2004, 12:08 pm
Location: Lee County, Ga

Post by sundown »

Chronarch is still the reel .....
User avatar
Chalk
Moderator
Posts: 11996
Joined: March 9th, 2002, 8:00 pm
Location: 30° 13' N, 85° 40' W
Contact:

Post by Chalk »

sundown wrote:Chronarch is still the reel .....
:roll: I have one, I'll trade it for a Curado 100 (gray model) and give you $25 bucks...Let's make a deal :lol:
CairoTrout
Site Sponsor
Posts: 1165
Joined: March 25th, 2003, 3:44 pm
Location: Cairo,Georgia

Post by CairoTrout »

I will take that deal Chalk.
All things are possible when you turn your life to Jesus.If you don't know how just ask.
User avatar
Chalk
Moderator
Posts: 11996
Joined: March 9th, 2002, 8:00 pm
Location: 30° 13' N, 85° 40' W
Contact:

Post by Chalk »

CairoTrout wrote:I will take that deal Chalk.
All right....I got a rod with a "loose" reel seat we need to work on too :thumbup: :thumbup:
Saltwater4me
Posts: 173
Joined: August 9th, 2004, 6:02 pm
Location: Thomasville

Post by Saltwater4me »

I am waiting on the REVO Inshore. Should be out in a week or two.

http://www.tackletour.com/reviewicast07reelspg4.html
"Support the country you live in OR live in the country you support!!!!"
Post Reply