Seafoam

airpressure · Post by **airpressure** » October 10th, 2007, 4:55 pm

Has anyone ever used this,if so does it work or is it just something for me to spend my money on?

Post by **Sea Dawg** » October 10th, 2007, 5:07 pm

It Works great You need to try it

airpressure · Post by **airpressure** » October 10th, 2007, 6:00 pm

Thanks Sea dawg just went and bought some

Post by **Pangler** » October 10th, 2007, 6:22 pm

I use it in all gas powered tools and toys!

DF 1860DLX · Post by **DF 1860DLX** » October 11th, 2007, 1:38 pm

Get you some deep creep for all your intake needs it works great.

yellow dog · Post by **yellow dog** » November 9th, 2007, 7:13 pm

i just dumped a can in my boat. hope it helps with it being so hard to keep running when it is cold i will let yall know.

Post by **MudDucker** » November 9th, 2007, 9:27 pm

Its some good stuff...use it in my gas for my mudmotors when duck hunting.

Post by RC » November 12th, 2007, 7:46 am

get you a 2 gallon portable tank. Put in one can of sea foam for each 3/4 gal of gas. Hook it up upstream of your fuel filter/ water separator. Crank it up and let it run for 15 minutes. Let sit for at least 30 min. Repeat until it doesn't smoke any more. You can even let it soak overnight it you want. If it bogs down its doing the job. Add a few rpms.

This method is for fuel injected engines. Will work with carburetor engines but they make the same stuff in aresol cans called deep creep that you spray in the carburetor.

You will definitely notice a difference.

Post by **boggob** » November 20th, 2007, 11:15 am

Is this stuff the same or similar to Ringfree?