Rod Shopppping??

This area is for general discussions about fishing, rigging, baits, etc.
Image

Moderators: bman, Chalk, Tom Keels

User avatar
fishfeeder
Site Sponsor
Posts: 231
Joined: July 31st, 2004, 4:17 pm
Location: Tally

Rod Shopppping??

Post by fishfeeder »

I am in the market for a new spinning and casting rod for reds....(Not That I'm Catching Any)

What's your goto rod for each....... Brand, Length, Action? Under $200
If you release them they will grow!!!!
birddog
Site Sponsor
Posts: 7516
Joined: May 22nd, 2003, 9:30 pm
Location: Thomasville, Georgia

Re: Rod Shopppping??

Post by birddog »

I'm using Challenger rods. The TGX series 6.5'-7' Med.-med./heavy. Great rod for under $100.

Heath at So. GA Outdoors tells me Challenger has a new rod out this year they're excited about. I'm anxious to see it.
GULP! free since 1970.
caseycook
Posts: 1304
Joined: November 11th, 2006, 11:27 pm
Location: Tallahassee

Re: Rod Shopppping??

Post by caseycook »

It's hard to go wrong with a Falcon. I own some Falcon lowriders and some inshore coastals...they're pretty sweet.

7' medium for topwater and twitchbaits, a 7' medium-heavy for the Ty Smith Special, and a 7' medium-light for jigs.

All Star makes a nice rod as well. I own a few Challengers and they're a lot heavier than the falcons.

In the end, it's all personal preference. Take your reel into the store and seat it on the rods that feel good...it helps you find the one that's right for you.
Boom goes the dynamite.
ALUMA25
Posts: 10
Joined: October 24th, 2007, 9:28 am
Location: HAHIRA GA.

Re: Rod Shopppping??

Post by ALUMA25 »

CHALLENGER RODS ARE HARD TO BEAT FOR THE MONEY. THEY HAVE A MARSH MASTER SERIES
AVAILABLE IN 6'6" AND 7' BOTH IN MED AND MED/HEAVY ACTION. THEY ALSO HAVE A NEW ROD
THIS YEAR THE TGX TROUT SPECIAL ALSO IN 6'6" OR 7FT. MED OR MED/HEAVY. BOTH ARE AVAILABLE
IN CASTING OR SPINNING VERSION. THEY ARE ALSO WELL BELOW $ 200.00. THESE RODS CAN ALSO BE
PURCHASED AT DIAMOND EAGLE MARINE IN VALDOSTA GA.
Tyler
Posts: 26
Joined: December 3rd, 2007, 10:42 pm
Location: St. Marks, FL

Re: Rod Shopppping??

Post by Tyler »

There are a lot of quality rods on the market. To me it depends on what you are doing with it. Since I've started using braid I like a rod that has a slower action. I try to look for the shimano reel seats and guides, and an action that fits the intended. Another consideration for me is the warranty and the return policy at the store I bought the rod at.
User avatar
Ty one on
Posts: 955
Joined: May 24th, 2004, 1:54 pm
Location: Wakulla, Fla.

Re: Rod Shopppping??

Post by Ty one on »

I have been using 7' rods for about 5 years. I paid $26 for them then. (They work good)

Last year I bought a 7.5' rod (medium). Paid around $60 for it. (I will never buy another rod under 7.5') I'm sorry but I don't know the brand. Just find a pretty 7.5 footer. Thats what I did.:thumbup:
If we were all crazy, Wouldn't that make us all normal.
User avatar
jsuber
Site Sponsor
Posts: 3350
Joined: January 12th, 2006, 3:57 pm

Re: Rod Shopppping??

Post by jsuber »

I use the Shimano Terramar Rods and when they are on sale I buy the Calcuttas. I use 7'10" and 8' rods with medium and medium light action. I need the extra length from the yak to cast. The Shimano Rods I use have over the counter return warranty for life. I can break one in Jacksonville and replace it if need be.
Image
User avatar
Ty one on
Posts: 955
Joined: May 24th, 2004, 1:54 pm
Location: Wakulla, Fla.

Re: Rod Shopppping??

Post by Ty one on »

jsuber wrote:The Shimano Rods I use have over the counter return warranty for life. I can break one in Jacksonville and replace it if need be.
Does Shimano have the "Oops I left my rods leaning on a palm tree at the boat ramp warranty" :smt005
If we were all crazy, Wouldn't that make us all normal.
User avatar
jsuber
Site Sponsor
Posts: 3350
Joined: January 12th, 2006, 3:57 pm

Re: Rod Shopppping??

Post by jsuber »

I wish they had it on their rods and reels then I would only be missing an Cabo 20 PTS
Image
Jumptrout51
Site Sponsor
Posts: 12120
Joined: December 12th, 2001, 8:00 pm
Location: Tallahassee

Re: Rod Shopppping??

Post by Jumptrout51 »

FALCON. :thumbup:
WHOSE FISH IS IT?
User avatar
fishfeeder
Site Sponsor
Posts: 231
Joined: July 31st, 2004, 4:17 pm
Location: Tally

Re: Rod Shopppping??

Post by fishfeeder »

All my rods have been 6' and 7' I am now considering the 7'6'' rods( Only because I see the guys on TV using 7'6" Rods for Reds and Trout) :roll: :hammer:

Do the Challengers or Falcons come in 7'6" and are they sold in/near Tallahassee?

I am looking for rods for my new quantum energy 770 with 15lbs power pro...and my new pflueger medalist 6035 with 15 lbs power pro.... Im thinking light action 7.5ft spinning for jigs and med heavy 7.5 ft for my casting spoons and top water.....am I correct in thinking the longer rod will give me longer casts?
If you release them they will grow!!!!
birddog
Site Sponsor
Posts: 7516
Joined: May 22nd, 2003, 9:30 pm
Location: Thomasville, Georgia

Re: Rod Shopppping??

Post by birddog »

Challenger does not make a rod in 7.5' or 8' but in my opinion they should.

You can purchase Challenger rods at South GA outdoors. Give Heath a call 229-377-HUNT. Heath is a straight up guy who'll treat you right.

I like the med/hvy for my spoon rod and use a med. action for most everything else. I think you'll find most light action rods inadequate for most inshore fishing.

A longer rod will generally give you better casting distance.
GULP! free since 1970.
User avatar
Chalk
Moderator
Posts: 11996
Joined: March 9th, 2002, 8:00 pm
Location: 30° 13' N, 85° 40' W
Contact:

Re: Rod Shopppping??

Post by Chalk »

birddog wrote:I think you'll find most light action rods inadequate for most inshore fishing.
So your saying I'm using inadequate equipment :smt076 :lol:
User avatar
Barhopr
Site Sponsor
Posts: 3736
Joined: September 25th, 2006, 10:21 pm
Location: Bainbridge/Beacon Hill

Re: Rod Shopppping??

Post by Barhopr »

birddog wrote:I think you'll find most light action rods inadequate for most inshore fishing.
:smt005
VIVA la BT

Image_______________Image
User avatar
Talltails
Posts: 642
Joined: February 2nd, 2007, 11:41 pm
Location: Oyster Bay

Re: Rod Shopppping??

Post by Talltails »

I have been using the Okuma Guide Select rods. They come in 7' or 7'6" and cost around $70. They are all IM8 blanks, have good backbone and sensitive tips. Throw in a lifetime over the counter warranty, and that is a hard deal to beat. I own several of them. I live in Crawfordville, so purchased them at Advantage Marine. I broke one a few months back doing something stupid, and Dale replaced it no questions asked :thumbup:
Post Reply