A unique website dedicated to fishing information from Florida's Northern Big Bend. This includes the area from the Econfina River west to the Apalachicola River
Got a nylon on mine. Used to think I wanted a stainless.
After abusing my $70.00 antenna a couple times by stepping on it when it was retracted, and smacking it last weekend while backing it under the shelter. I'm now glad I got the plactic one that gives. Better than the fiberglass antenna cracking.
Another point to concider; the antenna will screw onto the base. You'll have about 15 foot of cable to deal with hanging off the base of the antenna when you screw it on.
CSMarine wrote:
Another point to concider; the antenna will screw onto the base. You'll have about 15 foot of cable to deal with hanging off the base of the antenna when you screw it on.
That's why you screw on the antenna BEFORE you mount the base.
On the same subject....I need a base for my GPS antenna. I would like a nylon, but can't find one to fit on an 1-1/4" rail.
I've checked Bass Pro, west marine, and boaters world...no luck.
It's the mushroom shaped Garmin antenna. It will fit on a standard VHF mount. I just can't find a nylon mount to fit on the 1-1/4" rails on the t-top. I have a stainless mount for the CB, but wasn't looking to spend quite as much on the gps mount. May have to.......