(2) 3/8-inch thick aluminum brackets (8 1/4 x 8 x 8 1/4) with Stoltz poly rollers and end caps. One has the regular pal nuts, while the other has stainless steel cotter pins. Both roller pins are stainless steel, I believe (can't tell for sure on the one without taking it apart). The two brackets were custom fabricated. One was welded, while the other was bent. The bent one has minor cracks but is structurally sound.
I also have one 5/8-inch stainless steel roller pin 11 3/8 inches long, one 5/8-inch stainless steel rod 10 1/4 inches long and one zinc roller pin 13 1/4 inches long.
These are used, but in good shape. SOLD
- IMG_0732.jpg (125.31 KiB) Viewed 457 times