WTB: Rear End (3.73 ratio)

[skitterwalk]

I broke my differential gears on my rear axle so im looking for a rear end to throw in the back of my truck. If yall know anyone a PM would be GREATLY apprecited. Thanks:)

[Steve Stinson]

There is a salvage yard on the South side of town off of Monroe that I have had some good luck with finding Jeep parts. Also, you need to check with the 4x4 shops or mud bog forums here in the local area. All of those guys upgrade their axles to Rockwells and end up with a lot of stock parts left over.

What year and make is your truck?

Steve Stinson
President
NFGFC

[Dubble Trubble]

Like Steve said, it would help a lot if you posted the make, year and model of the truck.

Dubble

[Steve Stinson]

There is about 7 or 8 of them listed on Craigs List Tallahassee under Auto Parts-
http://tallahassee.craigslist.org/searc ... k=&maxAsk=

- Steve Stinson

[skitterwalk]

Sorry its a 2002, silverado, 4x4, 1500, and yea I checked economy salvage close to wakulla station and they wanted 1,200 or some rediculous number. And i've been watching craigslist but nothing that can fit my trruck. Ill have to check out some other 4x4 shops and pick and pull type places thanks yall.

[RiverRunner]

I somewhat did the same thing on a '88 Chevy back in the day also. I only broke my spider gears in the Gov lock(carrier). I was able to order a Auburn locker from Jegs and use my same ring and pinion and it wasn't much at all. Are sure the "Gears"(Ring and Pinion) that are bad? Plus, I did it myself and learned a lot....(setting up a rear end)

[skitterwalk]

honestly I think my ring and pinion gears are okay... I'll look into rebuilding it thanks !

[FHC]

ben call cox truck&van in moultrie 229 985 0310 or capital auto parts in thomasville 229 226 7878 call capital first

[skitterwalk]

Alright, will do!!