ice machine

This section is for our members to talk about things not actually about fishing or boating. However, please read the Code of Conduct before posting.
Image

Moderators: bman, Chalk, Tom Keels

Post Reply
wareagle
Posts: 8
Joined: February 14th, 2012, 4:37 pm

ice machine

Post by wareagle »

I am in Tallahassee. sorry about the poor grammar and forgetting all the info needed in post. am new to posting. will get the hang of it.
User avatar
mjsigns
Site Sponsor
Posts: 4918
Joined: June 8th, 2004, 10:14 pm
Location: Tallahassee

Re: ice machine

Post by mjsigns »

Welcome aboard wareagle - :smt006

JumpTrout is your go-to guy for appliance repairs. Heard of him fixin ice machines too.
:thumbup:
Time is the most precious commodity we have in life, stay focused.
wareagle
Posts: 8
Joined: February 14th, 2012, 4:37 pm

Re: ice machine

Post by wareagle »

anybody know how to get ahold of jumptrout. or if jumptrout sees this give me a call. 519-8546.
User avatar
Juan
Site Sponsor
Posts: 1648
Joined: October 14th, 2009, 8:58 am
Location: Cottonwood, AL

Re: ice machine

Post by Juan »

wareagle wrote:I am in Tallahassee. sorry about the poor grammar and forgetting all the info needed in post. am new to posting. will get the hang of it.
No need to apologize, your user name explains a lot! :-D
Life is short.... Ride a Harley and fish a Sea Pro
http://seaproforum.proboards.com/
wareagle
Posts: 8
Joined: February 14th, 2012, 4:37 pm

Re: ice machine

Post by wareagle »

that is the kind of boat I have juan.
Jumptrout51
Site Sponsor
Posts: 12120
Joined: December 12th, 2001, 8:00 pm
Location: Tallahassee

Re: ice machine

Post by Jumptrout51 »

What brand of ice machine and what is your issue?
WHOSE FISH IS IT?
wareagle
Posts: 8
Joined: February 14th, 2012, 4:37 pm

Re: ice machine

Post by wareagle »

it is an ice-o-matic. it is having an issue where it goes into ice harvest mode to often. like every 2 minutes or so. water has always worked then I went out there today and the water was not flowin. don't know much about ice machines.
User avatar
MudDucker
Site Sponsor
Posts: 6667
Joined: June 22nd, 2005, 3:07 pm
Location: Valdosta, Georgia

Re: ice machine

Post by MudDucker »

Juan wrote:
wareagle wrote:I am in Tallahassee. sorry about the poor grammar and forgetting all the info needed in post. am new to posting. will get the hang of it.
No need to apologize, your user name explains a lot! :-D
Oh no you didn't! :smt005 :smt005 :smt005
Its a wonderful day in the neighborhood!
Jumptrout51
Site Sponsor
Posts: 12120
Joined: December 12th, 2001, 8:00 pm
Location: Tallahassee

Re: ice machine

Post by Jumptrout51 »

I need a model number to be specific.
But,on iceomatic the harvest cycle is controlled by refrigerant pressure drop.
Poor or no water flow can cause a quick drop.
The water supply,water pump and water distribution tube must be checked and cleaned.
The water dump valve may be leaking water out during the freeze cycle as well.
If all these are checked and corrected there is possibility of a refrigerant leak or faulty low pressure valve.
Do the 2 refrigerant lines entering and leaving the evaporator ice over?
Is the machine perfectly level?
WHOSE FISH IS IT?
User avatar
wevans
Site Sponsor
Posts: 12827
Joined: June 12th, 2002, 11:06 am
Location: Sopchoppy

Re: ice machine

Post by wevans »

You forgot to ask the really important question Steve "Do you have plenty of beer, if he comes over to fix it?" :-D :lol: :beer: :beer:
“Before you criticize someone, you should walk a mile in their shoes. That way when you criticize them, you are a mile away from them and you have their shoes.”
Image
wareagle
Posts: 8
Joined: February 14th, 2012, 4:37 pm

Re: ice machine

Post by wareagle »

hey jumptrout. lost your phone number. wandering if you could give me a holla.
Last edited by wareagle on September 18th, 2013, 2:07 pm, edited 1 time in total.
leonreno
Posts: 710
Joined: June 13th, 2004, 4:18 pm
Location: Southwest GA

Re: ice machine

Post by leonreno »

I wouldn't put my phone number on the Internet, to many crazies, cons, etc. use the PM (private message) function of the forum to send it to him. I would edit your post and remove it after sending the PM.
Post Reply