Installed new trailer bling

All things having to do with boats, trailers, engines, electronics and accessories.
Image

Moderators: bman, Chalk, Tom Keels

Post Reply
leonreno
Posts: 710
Joined: June 13th, 2004, 4:18 pm
Location: Southwest GA

Installed new trailer bling

Post by leonreno »

Realizing my axles, hubs and springs were getting to rusted to be safe and with drum brakes that only worked for a short period of time after being replaced years ago, I decided a rebuild was instore.
Old stuff:
ImageImageImageImageImage

New stuff: new axles, springs, shackles, SS bolts, u bolts, brakes lines, SS brake calipers, dacromet hubs/rotors, brake lines and surge actuator.

ImageImageImage

Pulled boat to coast this past Saturday, and pulled like a dream, brakes made a much bigger difference than I thought it would. Also, seemed to be just a real smooth ride.


Sent from my iPhone using Tapatalk
Top
User avatar
fishinfool
Site Sponsor
Posts: 3130
Joined: June 17th, 2009, 8:58 pm

Re: Installed new trailer bling

Post by fishinfool »

:thumbup: :thumbup:
Top
Pirate
Posts: 427
Joined: April 28th, 2005, 1:19 pm
Location: Loganville, Ga.

Re: Installed new trailer bling

Post by Pirate »

Looks great. I'm in the same situation and will be making a move soon. I'm considering torsion axles. Anyone care to share their opinions on changing from leaf to torsion.
People that catch a lot of fish fish a lot!
Top
SS-342
Site Sponsor
Posts: 1819
Joined: March 25th, 2010, 3:04 pm

Re: Installed new trailer bling

Post by SS-342 »

Thanks for the post. I'd say you got your monies worth out of the old ones! SCARY or maybe "You can't judge a book by it's cover" would apply? Anyway…..good job!
SS-342
198DLV CS 115HP
13' Gheenoe 6HP
Top
leonreno
Posts: 710
Joined: June 13th, 2004, 4:18 pm
Location: Southwest GA

Re: Installed new trailer bling

Post by leonreno »

SS-342 wrote:Thanks for the post. I'd say you got your monies worth out of the old ones! SCARY or maybe "You can't judge a book by it's cover" would apply? Anyway…..good job!
They were scary when I got a good look at them.

I would have gone to torsion axles but it was faster to just install the springs using existing hangers. Otherwise, I would have had to measure and align new torsion axles. It would be hard with boat on trailer and I had no where to remove boat while I worked on it. Also, didn't want to risk of not aligning new axles correctly and chasing that problem after install.
Top
DEMON
Site Sponsor
Posts: 665
Joined: April 15th, 2010, 3:59 pm
Location: Tallahassee, FL

Re: Installed new trailer bling

Post by DEMON »

Looks great. Working brakes do make a difference plus got to have them to be legal. Nice work.
Top
DEMON
Site Sponsor
Posts: 665
Joined: April 15th, 2010, 3:59 pm
Location: Tallahassee, FL

Re: Installed new trailer bling

Post by DEMON »

Dbl post
Top
leonreno
Posts: 710
Joined: June 13th, 2004, 4:18 pm
Location: Southwest GA

Re: Installed new trailer bling

Post by leonreno »

DEMON wrote:Looks great. Working brakes do make a difference plus got to have them to be legal. Nice work.
Being legal was a major factor in doing the upgrade. For those who don't know, both Georgia and Florida require brakes on all axles for trailers that weigh more than 3000lbs. That's combined trailer and boat weight. I old assume most all tandem axle trailers fit this bill and many single axle brakes.
Top
leonreno
Posts: 710
Joined: June 13th, 2004, 4:18 pm
Location: Southwest GA

Re: Installed new trailer bling

Post by leonreno »

Double post also, maybe we broke the Internet.
Top
Post Reply

Return to “Boating”