HELP!!!!!!
Moderators: bman, Chalk, Tom Keels
HELP!!!!!!
Hey guys I am in need of a little help, during the install of the power head on my Yamaha F115 the threads in the bolt hole for the timing belt tensioner got damaged. I need a to see if anyone has a Heli-Coil kit I can use to repair it, a new one is $65 and I would hate to spend that on something I may only use once. The size I need is a M10 by 1.25 if anyone could help a guy out it would be greatly appreciated!!!!
-
FishWithChris
- Moderator
- Posts: 1401
- Joined: March 6th, 2009, 3:38 pm
- Location: Inshore
Re: HELP!!!!!!
Have you called Shields? They may have one you can borrow - if not, Sunshine may be able to help you out for a few quick bucks.
Three-fourths of the Earth's surface is water, and one-fourth is land. It is quite clear that the good Lord intended us to spend triple the amount of time fishing as taking care of the lawn. ~Chuck Clark
-
fishinfool
- Site Sponsor
- Posts: 3094
- Joined: June 17th, 2009, 8:58 pm
Re: HELP!!!!!!
There are a number of web sites that can help with cost if you can wait for delivery.
http://www.tooltopia.com/helicoil-5543-10.aspx
https://www.amazon.com/Helicoil-5543-10 ... B0002SRG34
https://www.summitracing.com/parts/oes- ... oCVnDw_wcB
http://www.sears.com/helicoil-thread-re ... lsrc=aw.ds
Be sure to use some loc-tite on the coil!
http://www.tooltopia.com/helicoil-5543-10.aspx
https://www.amazon.com/Helicoil-5543-10 ... B0002SRG34
https://www.summitracing.com/parts/oes- ... oCVnDw_wcB
http://www.sears.com/helicoil-thread-re ... lsrc=aw.ds
Be sure to use some loc-tite on the coil!