I need to get an aluminum fuel tank for the sea ark, there make a 13 gallon that would be perfect (actually had the same tank on my pontoon that I put on it before I sold it), anyone know if I can purchase directly from them and priced a lil better than the retailers. They have gone up a good bit since last time I got one, of course I know aluminum has gone way up over last couple of years
Thanks
Sent from my iPhone using Tapatalk
RDS aluminum in perry
Moderators: bman, Chalk, Tom Keels
Re: RDS aluminum in perry
I’d call them, UWS, and American Aluminum and see if by chance they had a blem.
-
- Site Sponsor
- Posts: 5113
- Joined: June 29th, 2003, 6:31 pm
- Location: Panhandler
Re: RDS aluminum in perry
I talked to them a few years back about a casting platform. They were so busy building OEM parts that they really didn't need my business. So I went elsewhere. Could have changed but doesn't sound like it.
You might check with Marine Liquidators in Ft. Pierce http://www.themarineconnection.net/ or Metal Fabrication in Tallahassee.
You might check with Marine Liquidators in Ft. Pierce http://www.themarineconnection.net/ or Metal Fabrication in Tallahassee.
"Sun rise and sun sets. Since the beginning, it hasn't changed yet." Little Feat
Re: RDS aluminum in perry
might check with gulf coast fabricators across from bigbend marine they may do that kind of work.i know a guy in perry that used to make em on the side that built me one for my 15 ft g3 I had I can check with him too see if he still does him for you.
-
- Site Sponsor
- Posts: 149
- Joined: February 9th, 2011, 6:22 pm
- Location: Douglas,Ga./Keaton Beach Fl.
Re: RDS aluminum in perry
They(RDS) built me a custom 70 gal tank, did everything over the phone then they e-mailed me the specifications for me to look at and sign off on and in two weeks I went and picked it up Give them a call
2016 Carolina Skiff 218DLV
Honda 115
Honda 115
-
- Site Sponsor
- Posts: 5113
- Joined: June 29th, 2003, 6:31 pm
- Location: Panhandler
Re: RDS aluminum in perry
My bad. I got business names mixed up. It was not RDS that I dealt with previously on the casting platform. Metal Fabrication or Marine Connection might still be able to help with your tank needs, though, if RDS is unable to build one for you at an affordable price.
"Sun rise and sun sets. Since the beginning, it hasn't changed yet." Little Feat
Re: RDS aluminum in perry
Thanks for the help fellows, I’m gonna give them a call, the 13 gallon they make is a stock unit for them, so not a special make which I know jacks the price way up, I’ll let y’all know what they say and report if need further assistance
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk