Offset seat post?

Post by **bman** » November 27th, 2020, 10:19 am

I need to swivel the back seat in my duck boat 3-4 inches toward the center when I’m hunting.
The seat is flush with a typical Atwood pin mount.
This would work of the pin was on the opposite side.

: 263623CD-B68E-4FB7-81B7-2FD862AF8B28.jpeg (26.29 KiB) Viewed 4042 times

I guess I could take it to a welder but does anyone have another idea?

Post by **MudDucker** » November 27th, 2020, 10:24 am

You can get them the opposite way. I have a couple I use.

Post by **bman** » November 27th, 2020, 1:45 pm

I cant find them on line....

Post by **MudDucker** » November 28th, 2020, 8:05 am

Hmmm, I've had mine about 10 years, but I don't see them online either.

You might have to get it customized. Be sure the bushing on the pin is big enough that the arm doesn't scrape your boat when you rearend is in the seat.

Post by **fishinfool** » November 28th, 2020, 9:01 am

https://www.cabelas.com/shop/en/bass-pr ... lsrc=aw.ds

Post by **bman** » November 28th, 2020, 10:05 am

Saw that one... it’s going to sit me up too high

Post by **silverking** » November 28th, 2020, 10:07 am

Metal Fabrication of Tallahassee could make one to your exact specs.

You might also check with West Marine and Overtons on-line.

BigBendFishing.Net

Offset seat post?

Offset seat post?

Re: Offset seat post?

Re: Offset seat post?

Re: Offset seat post?

Re: Offset seat post?

Re: Offset seat post?

Re: Offset seat post?