Looking for rod holders

[Juan]

I want to add a couple of rod holders near the bow on the bay boat and can't find the style I need.. They're going to be mounted in corners and the single PVC rod holders are a good fit but I don't want the PVC ones. I thought I had seen the same style holders in stainless steel but don't remember where I saw them and can't find them on the web. Anyone know where I can find the stainless steel holders?
Like this but stainless:

[edif]

found a pair on ebay for 41 bucks

[Juan]

I can't find em there. Gotta link?

[tailwaters]

Birdsall Marine

[leonreno]

I found these, similar but not exact:
https://www.amazon.com/Amarine-made-Fis ... B00N8K0IH4

https://hotstuff4fishing.com/products/a ... ets-2-pack

https://www.anchorexpress.com/Tigress-S ... jAQAvD_BwE


Search “single surface mount stainless steel rod holder” for more of the same.

[Juan]

Thank you. I had looked at those and because of the mounting bracket style I don't think they will fit into the corners where I want them. I may have to pick another location.

[fishinfool]

Found a couple that might fit your needs,

https://www.boatoutfitters.com/transom- ... _wcB#93=17

https://www.amazon.com/SEACHOICE-Holder ... B000N9HPDI

https://www.boatid.com/seasucker/seasuc ... 11472.html

[SCALAWAG]

Check out the ( bay-sun store on ebay)

[Salty Gator]

Have you considered flush mounted holders? That’s the way I’ll eventually go.

[Juan]

Have you considered flush mounted holders? That’s the way I’ll eventually go.

I initially considered flush mounts David but the way the hull is sloped, they won't fit anywhere except over a rod box or storage compartment and I don't want that. I'd have bet money I had seen the exact style of the PVC holders in stainless steel but maybe I'm wrong. I may have to buy a stainless steel triple rod holder and center it on the storage box but I really want to put them in the corners if possible.

[ropeman]

I wonder if you could bend the tabs on this one to fit in the corner?

https://www.amazon.com/SEACHOICE-Holder ... B000N9HPDI

[Juan]

I wonder if you could bend the tabs on this one to fit in the corner?

https://www.amazon.com/SEACHOICE-Holder ... B000N9HPDI

Thanks but I looked at that option too and I think if I bent the brackets, the angle would make it impossible to get to the mounting holes.

[leonreno]

Here is one out of aluminum, may work depending on how you are going to bolt it in.
https://www.boatoutfitters.com/rod-hold ... hite-liner

[Juan]

Here is one out of aluminum, may work depending on how you are going to bolt it in.
https://www.boatoutfitters.com/rod-hold ... hite-liner

I can make those work! Great find. Thank you!!