Choosing the correct prop

[Welby]

I could use some help please. I’m replacing the prop on my G3 17’ CC Gator Tough. The prop I took off has no identification markings…none. The motor is a Yamaha F60. I don’t have a tachometer. I would like to get as close as possible to what I have now. Boat alone is approx 900 lbs.
Any ideas on how I determine the proper prop for this boat?
Thanks in advance.

[homboyfsu]

CO2 15
991227
Vortex
MI Wheel
92408 15P
I got the same boat and motor

[Welby]

I did find, finally, find the info on the current prop. It’s a 10-5/8 X 12 G.
That’s a lot less pitch than yours. Now I’m curious as to how a higher pitched prop would perform on my boat.
I assume you’re pleased with the performance of the 15 pitch you have?

[homboyfsu]

Correct it works well for me.

[Hit-n-Miss]

I did find, finally, find the info on the current prop. It’s a 10-5/8 X 12 G.
That’s a lot less pitch than yours. Now I’m curious as to how a higher pitched prop would perform on my boat.
I assume you’re pleased with the performance of the 15 pitch you have?

More top end/less hole shot.

[3-300]

call prop gods... he is the best, give him some info and he will do you right!

[Hit-n-Miss]

I did find, finally, find the info on the current prop. It’s a 10-5/8 X 12 G.
That’s a lot less pitch than yours. Now I’m curious as to how a higher pitched prop would perform on my boat.
I assume you’re pleased with the performance of the 15 pitch you have?

You ever get a prop?