<img src="http://www.forumpictureprocessor.com/pi ... 006_14.jpg">
THIS IS THE FIRST TIME I HAVE EVER TRIED TO POST ANY PICTURES!
HOPE THIS WORKS IF NO SORRY I WILL TRY AGAIN
JUST TESTING
Moderators: bman, Chalk, Tom Keels
-
coolrowcamping
- Posts: 32
- Joined: July 10th, 2003, 9:47 am
- Location: Valdosta, GA
SORRY
I SCREWED UP!
WHAT DID I DO WRONG?
WHAT DID I DO WRONG?
-
dstockwell
- Posts: 4214
- Joined: March 5th, 2002, 8:00 pm
- Location: Valdosta, GA
[.img]http://www.forumpictureprocessor.com/pi ... 006_14.jpg[./img]
Remove the periods I place in front of img /img
Re: JUST TESTING
Take out the <img src=" and replace with [img],%20then%20take%20the%20">%20off%20the%20other%20end%20and%20put[/img] in it's placecoolrowcamping wrote:<img src="http://www.forumpictureprocessor.com/pi ... 006_14.jpg">
THIS IS THE FIRST TIME I HAVE EVER TRIED TO POST ANY PICTURES!
HOPE THIS WORKS IF NO SORRY I WILL TRY AGAIN
“Before you criticize someone, you should walk a mile in their shoes. That way when you criticize them, you are a mile away from them and you have their shoes.”
on how, and I did it before wevans much more clearly 'splained it. 
Good morning coolrow...
If you haven't figured it out from DS's picture maybe this will help.
I think you may have missed a piece when you copied the code from the picture processor. The address for your picture is....
http://www.forumpictureprocessor.com/pi ... 006_14.jpg
If you highlight the link and then click on the "Img" radio button the link will be preceded by the following code [img]and%20the%20end%20of%20the%20link/code%20will%20be%20followed%20by[/img]. The first command says "here comes a image and the second one says "that's all the address for the image" Understand this ain't technical language...just my walk'n round explanation
The code from the picture process should need nothing else when you insert it into your post....PROVIDED you selected the Big Bend Fishing Net from the drop down list of sites. A straight copy and paste should work. Hope this helps... if not....ask again, somebody will be able to clear it up for you.
If you haven't figured it out from DS's picture maybe this will help.
I think you may have missed a piece when you copied the code from the picture processor. The address for your picture is....
http://www.forumpictureprocessor.com/pi ... 006_14.jpg
If you highlight the link and then click on the "Img" radio button the link will be preceded by the following code [img]and%20the%20end%20of%20the%20link/code%20will%20be%20followed%20by[/img]. The first command says "here comes a image and the second one says "that's all the address for the image" Understand this ain't technical language...just my walk'n round explanation
The code from the picture process should need nothing else when you insert it into your post....PROVIDED you selected the Big Bend Fishing Net from the drop down list of sites. A straight copy and paste should work. Hope this helps... if not....ask again, somebody will be able to clear it up for you."Good Judgement" comes from experience, ... and a lot of that..... results from "Bad Judgement".