Hard Top

Post by **Second Chance** » April 16th, 2003, 3:13 pm

I want to replace the soft top on my Mako 253 with a hard top. I keep the boat in C'belle at the Moorings. Can anyone recommed a business in the area or 75mi radius that does that kind of work?

Post by **Chalk** » April 16th, 2003, 4:06 pm

Second Chance, Thought about doing it yourself? Check out this website http://www.sportfishingflorida.net/greg ... roject.htm The board that is used is available at home supply stores. It has a lite fiberglass coating from the factory. Use some 1200 biax fabric, epoxy and paint. Good luck.

Post by **Second Chance** » April 16th, 2003, 4:17 pm

Chalk, Thanks that may be a option.

Post by **wevans** » April 17th, 2003, 8:34 am

There's a new place in Sopchoppy that does custom SS, I don't even know their name yet, but I bet Scooter at Avery Marine knows them

Post by **Second Chance** » April 17th, 2003, 2:41 pm

Wevans, thanks I just got off the phone with Scooter. I think he is going to be able to help me.

Post by **Second Chance** » June 16th, 2003, 8:35 am

Got my boat back with the hard top inatalled

Scooter over at Avery took care of all the electronics and antennas. Joe over at Pro Welding & Fabrication in Sopchoppy built and installed the top. Thanks for the advise Wevans

I would highly recommend both of these guys. The work was first class and the pricing reasonable. Now I just need to get back down and put her in the water

Post by **wevans** » June 16th, 2003, 11:17 am

That's good ta hear

hope ys get a lot of use out of it