All things having to do with boats, trailers, engines, electronics and accessories.
Moderators: bman , Chalk , Tom Keels
Will_Fish_4_Food
Site Sponsor
Posts: 505 Joined: January 3rd, 2002, 8:00 pm
Location: Tallahassee Reservation
Post
by Will_Fish_4_Food » September 9th, 2006, 8:49 pm
I need a new fuel tank installed.
tin can
Site Sponsor
Posts: 12535 Joined: May 6th, 2002, 8:00 pm
Location: Tallahassee, Florida
Post
by tin can » September 10th, 2006, 6:27 am
Mike's Marine Ways, behind the Dollar General, just north of the intersection of Woodville Highway and US98.
What was I supposed to do today?
Will_Fish_4_Food
Site Sponsor
Posts: 505 Joined: January 3rd, 2002, 8:00 pm
Location: Tallahassee Reservation
Post
by Will_Fish_4_Food » September 10th, 2006, 10:23 pm
Thanks I'll try them tomorrow.
EddieJoe
Posts: 861 Joined: December 11th, 2001, 8:00 pm
Post
by EddieJoe » September 11th, 2006, 6:58 am
Will_Fish_4_Food wrote: I need a new fuel tank installed.
Joey Walker - Panacea. Did my fuel tank.
EJ
MudDucker
Site Sponsor
Posts: 6665 Joined: June 22nd, 2005, 3:07 pm
Location: Valdosta, Georgia
Post
by MudDucker » September 11th, 2006, 7:15 am
I used Gene Griffis from Nashville, GA to redo my proline. If you aren't in a hurry, he is a good fiberglass man.
Salt Life
Posts: 267 Joined: January 25th, 2006, 11:15 pm
Location: I come from where the river meets the sea Live Oak Island
Contact:
Post
by Salt Life » September 11th, 2006, 8:11 am
.
Last edited by
Salt Life on September 19th, 2006, 8:44 am, edited 1 time in total.
Will_Fish_4_Food
Site Sponsor
Posts: 505 Joined: January 3rd, 2002, 8:00 pm
Location: Tallahassee Reservation
Post
by Will_Fish_4_Food » September 11th, 2006, 9:22 am
Tin Can,
Do you have a number for them. I can't find one.
EJ,
How about your guy, do you have a number?
pops
Site Sponsor
Posts: 484 Joined: May 6th, 2002, 8:00 pm
Location: Monticello, FL
Post
by pops » September 11th, 2006, 10:25 am
Joey Walker did me a fine job installing a rear deck and also insulating my live well in my kenner
GO GATORS!!
If it does not meet your standards, Lower your standards!!
EddieJoe
Posts: 861 Joined: December 11th, 2001, 8:00 pm
Post
by EddieJoe » September 11th, 2006, 5:47 pm
Will_Fish_4_Food wrote: Tin Can,
Do you have a number for them. I can't find one.
EJ,
How about your guy, do you have a number?
For Joey:
850-984-3400 in Panacea
Salt Life
Posts: 267 Joined: January 25th, 2006, 11:15 pm
Location: I come from where the river meets the sea Live Oak Island
Contact:
Post
by Salt Life » September 18th, 2006, 7:32 pm
Bye Bye
Last edited by
Salt Life on September 19th, 2006, 8:43 am, edited 1 time in total.
Chalk
Moderator
Posts: 11996 Joined: March 9th, 2002, 8:00 pm
Location: 30° 13' N, 85° 40' W
Contact:
Post
by Chalk » September 18th, 2006, 7:53 pm
Glad it's finished...
Please reframe from the use of certain language, Thank you
NoleFear
Posts: 137 Joined: January 2nd, 2006, 8:16 pm
Location: Tallahassee, Florida
Post
by NoleFear » September 18th, 2006, 8:04 pm
Mike's Marine Ways
They do good work.
Redfish Jim
Site Sponsor
Posts: 429 Joined: January 17th, 2006, 7:15 pm
Location: Tallahassee
Post
by Redfish Jim » September 18th, 2006, 8:15 pm
I had Mike's Marine Ways do a bottom job on a sailboat a long time ago. Same business name but they had a place on the St. Marks river next to Posey's. I'm assuming they're the same people and they just moved out to Hwy 98.
Anyway, assuming my assumptions are correct
, I'll ditto the other recs on this thread for these guys. They're friendly people and did a good job when they said they were going to get it done
Good luck with your project.
Will_Fish_4_Food
Site Sponsor
Posts: 505 Joined: January 3rd, 2002, 8:00 pm
Location: Tallahassee Reservation
Post
by Will_Fish_4_Food » September 18th, 2006, 10:20 pm
I went with a different one after all that. I'll post the results when complete.