Don's Boats

This section is for our members to talk about things not actually about fishing or boating. However, please read the Code of Conduct before posting.
Image

Moderators: bman, Chalk, Tom Keels

Flats Rascal
Site Sponsor
Posts: 1056
Joined: March 10th, 2004, 9:23 am
Location: Tallahassee
Contact:

Post by Flats Rascal »

Thanks for your responses. Are the folks at the new Don's the same folks as the old Don's? Is Chris from Don's or Bellflower?

I hesitate to go to Don's because of the few dealings I've had with them - looking for a new boat three years ago and a few phone convos in the past - well, their attitude wasn't customer friendly, in my opinion.


8)
Jesus saves, George Nelson withdraws!
Jumptrout51
Site Sponsor
Posts: 12120
Joined: December 12th, 2001, 8:00 pm
Location: Tallahassee

Post by Jumptrout51 »

Chris is old Bellflower.
WHOSE FISH IS IT?
User avatar
seatrout99
Site Sponsor
Posts: 1069
Joined: January 16th, 2002, 8:00 pm
Location: Climax, GA
Contact:

Post by seatrout99 »

It hasn't gotten any better. I've dealt with Don's (in Valdosta and Tallahassee) and Bellfolowers. All the same.
Flats Rascal
Site Sponsor
Posts: 1056
Joined: March 10th, 2004, 9:23 am
Location: Tallahassee
Contact:

Post by Flats Rascal »

Actually, I purchased my rig at Bellflower in 2003. 2004 Cape Horn 14/ 50 Johnson 4s and they were always helpful and courteous. Answered every question I had like they were glad I asked. Tweaked out any small problem I had pronto.


8)
Jesus saves, George Nelson withdraws!
User avatar
seatrout99
Site Sponsor
Posts: 1069
Joined: January 16th, 2002, 8:00 pm
Location: Climax, GA
Contact:

Post by seatrout99 »

I recently took Don's a fairly new motor under warranty with an idling/shifting issue. They could not diagnose the problem and fix it, so they said they couldn't bill Bomb. Wanted me to pay for two days of shop time and spark plugs they said the motor needed. This is a one year old motor with 50 hours on it that isn't supposed to need a tune-up for three years (ETEC). I said no, and called BOMB. BOMB said they would work it out with the dealer. I haven't been back.

Don's said the in-gear idle speed could not be adjusted on an ETEC. A dealer from South Florida emailed me the screen prints of the procedures and a dealer in GA did the adjustments. No problem - done deal.
Flats Rascal
Site Sponsor
Posts: 1056
Joined: March 10th, 2004, 9:23 am
Location: Tallahassee
Contact:

Post by Flats Rascal »

My repairs will probably be fairly simple.


1. My throttle lever/handle is loose and cannot be tightened - something internal.

2. This past weekend my tilt had a mind of its own. Up or down. Try running 3/4 and your motor suddenly tilting to the full up position.

3. Problem 2 may have something to do with problem 1.


Probably drive down to Shields. At least they showed an interest in my problems. I'll let ya'll know.





8)
Jesus saves, George Nelson withdraws!
User avatar
Reel Slow
Site Sponsor
Posts: 1819
Joined: June 30th, 2005, 5:37 pm
Location: Tally

Post by Reel Slow »

A friend has had work done at Shell Island. After they worked on his boat, we put in at Econfina and the battery of troller was dead (the charger they installed didnt work), they broke off the hose on water intake for live well and water rushed in like stuck pig when he ran, and they didn't mount a battery charger, just laid it loose in there...While I got a good laugh, my buddy was not impressed....I thought the work was sloppy, but they stood behind problems they caused.... FWIW I'd go Sheilds...
Jumptrout51
Site Sponsor
Posts: 12120
Joined: December 12th, 2001, 8:00 pm
Location: Tallahassee

Post by Jumptrout51 »

Don's Boats Valdosta was sold about three years ago. Don't know anything about the new owners.
Don's Boats Tallahassee---Don died several months ago. The new management and ownership is trying hard to please.
I would appreciate if everyone would give them a fair chance to survive.
WHOSE FISH IS IT?
User avatar
tin can
Site Sponsor
Posts: 12535
Joined: May 6th, 2002, 8:00 pm
Location: Tallahassee, Florida

Post by tin can »

I was told recently that Cris is no longer there.
What was I supposed to do today?
Jumptrout51
Site Sponsor
Posts: 12120
Joined: December 12th, 2001, 8:00 pm
Location: Tallahassee

Post by Jumptrout51 »

tin can wrote:I was told recently that Cris is no longer there.
He was 2 weeks ago. I'll check it out.
WHOSE FISH IS IT?
User avatar
MudDucker
Site Sponsor
Posts: 6665
Joined: June 22nd, 2005, 3:07 pm
Location: Valdosta, Georgia

Post by MudDucker »

Jumptrout51 wrote:Don's Boats Valdosta was sold about three years ago. Don't know anything about the new owners.
Don's Boats Tallahassee---Don died several months ago. The new management and ownership is trying hard to please.
I would appreciate if everyone would give them a fair chance to survive.
AD Holt bought the Valdosta store several years ago and it is now known as Diamond Eagle Marine. Most of the folks in the front of the store are new there other than Winsel Love. I purchased a riverhawk from them recently, but haven't had any service done there.

Don Galloway did pass away from cancer recently. He had been pretty sick for a good while. Don't know if his family still has the dealership or if it has been sold.
User avatar
dstockwell
Posts: 4214
Joined: March 5th, 2002, 8:00 pm
Location: Valdosta, GA

Post by dstockwell »

Jumptrout51 wrote:The new management and ownership is trying hard to please. I would appreciate if everyone would give them a fair chance to survive.
Well the first thing they need to do is change the name of the place.
mattfsu7
Site Sponsor
Posts: 52
Joined: March 4th, 2004, 12:52 pm
Location: Tallahassee

Post by mattfsu7 »

I don't know about warranty work, my boat and motor are no longer under warranty. But I just recently took my boat to Parkway Car Care Center. These guys have worked on my cars for years and always treated me right. They have just got into the boat business selling skinny water boats and motors as well as doing boat repairs.

I have a Johnson 115 on a Cape Horn 17ft. I took my boat in to have the trim and tilt hydraulics fixed and they did great work. Not the cheapest, but if you want it done right, these guys are great. I highly recommend them.
Flats Rascal
Site Sponsor
Posts: 1056
Joined: March 10th, 2004, 9:23 am
Location: Tallahassee
Contact:

Post by Flats Rascal »

I don't know about warranty work, my boat and motor are no longer under warranty. But I just recently took my boat to Parkway Car Care Center. These guys have worked on my cars for years and always treated me right. They have just got into the boat business selling skinny water boats and motors as well as doing boat repairs.

I have a Johnson 115 on a Cape Horn 17ft. I took my boat in to have the trim and tilt hydraulics fixed and they did great work. Not the cheapest, but if you want it done right, these guys are great. I highly recommend them.
I've learned a few new curse words from Quinn.


:-D
Jesus saves, George Nelson withdraws!
User avatar
tin can
Site Sponsor
Posts: 12535
Joined: May 6th, 2002, 8:00 pm
Location: Tallahassee, Florida

Post by tin can »

Flats Rascal wrote:
I don't know about warranty work, my boat and motor are no longer under warranty. But I just recently took my boat to Parkway Car Care Center. These guys have worked on my cars for years and always treated me right. They have just got into the boat business selling skinny water boats and motors as well as doing boat repairs.

I have a Johnson 115 on a Cape Horn 17ft. I took my boat in to have the trim and tilt hydraulics fixed and they did great work. Not the cheapest, but if you want it done right, these guys are great. I highly recommend them.
I've learned a few new curse words from Quinn.


:-D
Don't give Quinn too hard a time. He came by it honest. :-D
What was I supposed to do today?
Post Reply