Another year and another project....
Moderators: bman, Chalk, Tom Keels
Should we expect a dislpay at the social?
Barry Bevis, Realtor and Owner of BigBendFishing.net
I liked it so much, I bought the company
http://www.bevisrealty.com

TEAM "Duck Season!"
I liked it so much, I bought the company

http://www.bevisrealty.com

TEAM "Duck Season!"
- Chalk
- Moderator
- Posts: 11996
- Joined: March 9th, 2002, 8:00 pm
- Location: 30° 13' N, 85° 40' W
- Contact:
Maybe next yearbman wrote:Should we expect a dislpay at the social?




- Hit-n-Miss
- Posts: 3532
- Joined: May 20th, 2004, 12:15 pm
- Location: Boston Ga.
- Chalk
- Moderator
- Posts: 11996
- Joined: March 9th, 2002, 8:00 pm
- Location: 30° 13' N, 85° 40' W
- Contact:
Opened up the center bulkheads today w/ integrated rod holders. Bulkhead pictured started the day at 8.12 lbs and finished the day at 2.07 lbs. I need to do some more sanding and cover with a layer of glass before installing. Rod holders will be lined with carpet once installed.
Once installed the boat can easily accomodate 8 rods and a maximum of 12 (6 forward and 6 rear)

To Be Continued...
Once installed the boat can easily accomodate 8 rods and a maximum of 12 (6 forward and 6 rear)

To Be Continued...
- Chalk
- Moderator
- Posts: 11996
- Joined: March 9th, 2002, 8:00 pm
- Location: 30° 13' N, 85° 40' W
- Contact:
Bulkheads 1 & 2 and associated stringers are glassed in...glassing the front bow stringers and bulkheads proved to be difficult but doable task...alot of angles to work resin, fillets and fiberglass tape in...I hope to be done with the frame work in a week...then some rigging, then flooring and paint.
She's getting close
She's getting close

Posted: Mon Jan 22, 2007 - 8:39bman wrote:Should we expect a dislpay at the social?
How about this year

Barry Bevis, Realtor and Owner of BigBendFishing.net
I liked it so much, I bought the company
http://www.bevisrealty.com

TEAM "Duck Season!"
I liked it so much, I bought the company

http://www.bevisrealty.com

TEAM "Duck Season!"
- Chalk
- Moderator
- Posts: 11996
- Joined: March 9th, 2002, 8:00 pm
- Location: 30° 13' N, 85° 40' W
- Contact:
14 boxes done (stringer & bulkhead connections make a box)...only 10 more to do
...I took my like an hour a box...seems long but when you prime, fillet, cut glass, lay glass and then wet out the lamination it can take awhile
6 oz of epoxy, 15 scoops of blended fill and 3 scoops of cabosil will fillet a box and a half
Getting close

6 oz of epoxy, 15 scoops of blended fill and 3 scoops of cabosil will fillet a box and a half

Getting close
