All things having to do with boats, trailers, engines, electronics and accessories.
Moderators: bman , Chalk , Tom Keels
Chalk
Moderator
Posts: 11996 Joined: March 9th, 2002, 8:00 pmLocation: 30° 13' N, 85° 40' W
Contact:
Post
by Chalk February 18th, 2007, 10:01 am
Anyone know how to do it? I'm looking for something to occupy my time
I found directions on howto do the linear version, can't figure out the three strand version.
birddog
Site Sponsor
Posts: 7516 Joined: May 22nd, 2003, 9:30 pmLocation: Thomasville, Georgia
Post
by birddog February 18th, 2007, 10:02 am
and why are you doing this?
GULP! free since 1970.
AJ
Site Sponsor
Posts: 938 Joined: December 24th, 2001, 8:00 pmLocation: Tallahassee
Post
by AJ February 18th, 2007, 10:14 am
You need to find things to keep you busy? ? ?
You gonna talk, or you gonna fish?
Chalk
Moderator
Posts: 11996 Joined: March 9th, 2002, 8:00 pmLocation: 30° 13' N, 85° 40' W
Contact:
Post
by Chalk February 18th, 2007, 10:14 am
Just something else I find interest in...plus I thought my steering wheel would look cool with it...like this
birddog
Site Sponsor
Posts: 7516 Joined: May 22nd, 2003, 9:30 pmLocation: Thomasville, Georgia
Post
by birddog February 18th, 2007, 10:16 am
Thats what I thought. I saw it on Flip's new boat. Make me 1 too. I need something to dress up my old drab turd of a boat.
GULP! free since 1970.
Chalk
Moderator
Posts: 11996 Joined: March 9th, 2002, 8:00 pmLocation: 30° 13' N, 85° 40' W
Contact:
Post
by Chalk February 18th, 2007, 10:23 am
I believe the one on Flips boat is the linear cockscombing...That's Capt Bryan's boat, I got my fly rod from him...What a thought...maybe I should ask him
The first picture I showed, they guy will sell you a finished wheel for $500
Redbelly
Site Sponsor
Posts: 2908 Joined: June 20th, 2004, 10:05 amLocation: Thomasville
Post
by Redbelly February 18th, 2007, 10:26 am
I would not copy anything from a guy with a babyblue boat like that !!!!
Work 2 fish 4 days
Chalk
Moderator
Posts: 11996 Joined: March 9th, 2002, 8:00 pmLocation: 30° 13' N, 85° 40' W
Contact:
Post
by Chalk February 18th, 2007, 10:30 am
Redbelly wrote: I would not copy anything from a guy with a babyblue boat like that !!!!
That is the same color of my boat....
AJ
Site Sponsor
Posts: 938 Joined: December 24th, 2001, 8:00 pmLocation: Tallahassee
Post
by AJ February 18th, 2007, 10:32 am
What is the material, twine? It would have to be something easy to clean, maybe with a weatherproof coating on it, or would you put a finish on it after you're done?
You gonna talk, or you gonna fish?
Chalk
Moderator
Posts: 11996 Joined: March 9th, 2002, 8:00 pmLocation: 30° 13' N, 85° 40' W
Contact:
Post
by Chalk February 18th, 2007, 10:41 am
You can use just about anything....nylon or cotton is normally used on boats...I found a site yesterday where I guy was making rings, bracelets and such out of gold and silver
birddog
Site Sponsor
Posts: 7516 Joined: May 22nd, 2003, 9:30 pmLocation: Thomasville, Georgia
Post
by birddog February 18th, 2007, 10:42 am
Chalk wrote:
The first picture I showed, they guy will sell you a finished wheel for $500
You'll let me have the free kinfolk deal, right?
GULP! free since 1970.
birddog
Site Sponsor
Posts: 7516 Joined: May 22nd, 2003, 9:30 pmLocation: Thomasville, Georgia
Post
by birddog February 18th, 2007, 10:42 am
GULP! free since 1970.
GIT-R-WET
Site Sponsor
Posts: 319 Joined: August 1st, 2003, 1:34 pmLocation: Day, FL
Post
by GIT-R-WET February 18th, 2007, 11:16 am
"LIFE IS GOOD IN THE GREAT OUTDOORS"
jsuber
Site Sponsor
Posts: 3350 Joined: January 12th, 2006, 3:57 pm
Post
by jsuber February 18th, 2007, 11:34 am
Maybe you could knit a nice Cozy to go over the top of your boat too. I just wanted to climb on.
Atticus
Site Sponsor
Posts: 1763 Joined: April 1st, 2002, 8:00 pmLocation: Tallahassee
Post
by Atticus February 18th, 2007, 11:45 am
jsuber wrote: Maybe you could knit a nice Cozy to go over the top of your boat too.
Zing!
Also wouldn't that thing get filthy on a steering wheel?
